4
Troubleshooting
English
SituationSolution
•Connect the power cord properly.
•Check if the power LED is on or not.
No picture and sound. | • Press | on the control panel or remote control. |
•Press Input to cycle through connected video sources.
•Press PS or PT to switch to other TV programs.
•Make sure all cables are connected properly.
No picture, or poor picture, | • Check the antenna and cable connections. | |
sound is OK. | • Adjust the brightness in the Picture OSD menu. | |
Picture is not in color. | • Adjust the colour option in the Picture OSD menu. | |
| • Make sure the source device is functioning properly. | |
Picture is OK, no sound. | • Make sure the audio cable is connected securely. | |
• Turn the mute off. | ||
| ||
| • Press VOL + on the control panel or remote control. | |
|
| |
One of the speakers has no | • Adjust the balance in the Audio OSD menu. | |
sound. | ||
| ||
|
| |
Cannot receive some TV | • Try the Auto Scan function in the Channel Management | |
channels using cable TV. | OSD menu. | |
|
| |
Want to reset TV settings. | • Use the Reset Setting function in the Setting OSD | |
menu. | ||
| ||
|
| |
Cannot operate menus. | • If OSD items are colored in gray, the system is in a state | |
such that those settings are not available. | ||
| ||
|
| |
Screen image turns over. | • Make sure the video signal cable is connected properly. | |
| • Adjust the location of the antenna, placing it far from | |
Snow appears on the screen. | roads or sources of interference. | |
| • Check the antenna and the video signal line connections. | |
|
| |
| • Adjust the sharpness setting. | |
Blurred or overlapped | • Choose programs with high quality signals. | |
images. | • Adjust the direction of the antenna or replace the video | |
| signal cable. | |
|
| |
| • Make sure the battery is inserted correctly. | |
| • Replace the battery with a new one. | |
| • Make sure the TV power cord is plugged in. |
Remote control doesn’t work. • Make sure the path between the remote control and the sensor is clear.
• Try operating the remote control at a closer distance to the TV.
34