MTS
TV Setting
A 
M
CH
MTS
Stereo SAP Mono
1Press channel down or channel up to select MTS.
2Press menu to enter the MTS submenu. Select from the following options.
Stereo
Press channel down to select Stereo. A green dot appears and Stereo is highlighted in yellow. Press menu again to confirm the selection.
SAP
Press channel up to select SAP. Press menu again to confirm the selection. If a green dot does not appear, then your service provider doesn’t support SAP. This option may not be available in your local area.
Mono
Press channel up to select Mono. Press menu again to confirm Mono, which outputs sound through a signal channel.
Note
The new setting is confirmed automatically when the OSD times out.
45