Metz manual Turning the TV on and off, Language selection in the TV menu, Backlight only Protos

Page 5

1.1 Turning the TV on and off

Turning on with the ON/OFF key

Before turning on a cold TV in a warm room, first allow any condensation mist that may have formed on the screen to evaporate.

Press the ON/OFF key.

Programme position 1 is then selected. Depending on the assign- ments made, the following information will appear in the screen box:

Pr 1 MONO

ARD 18:15:33

The programme position is also shown on the permanent dis- play.

Turning on with the remote control

The programmes can be directly selected with the 0-9 keys when the television is in standby mode.

The last programme watched before the television was switched

off can be set with the key.

The television is automatically set to standby mode ten minutes after station closedown. However, this is not the case if the station starts to transmit a test card within these ten minutes.

Turning off with the remote control

Press the key to switch the TV to standby mode. The stand- by status is indicated by the red lamp.

Turning off with the ON/OFF key

Press the ON/OFF key. The television is now disconnected from the mains. You are advised to turn off the TV with the ON/OFF key after station closedown and when it is not going to be used for an extended period of time.

1.2 Language selection in the TV menu

Press this key on the remote

control....

1.Call the Equipm. Configuration menu

MENU

red

green

2. Adjust the language

-

+

3. Store the selected language

The screen displays

MENU return

TV picture

? Help

Equipm. configuration

1

2

 

3

Function keys

4

5

 

6

 

 

7

8

 

9

Device connection

--/-

0

 

 

 

 

 

 

 

 

P+

 

 

 

 

-

OK

+

SAT settings

 

 

 

P-

 

 

 

 

 

 

 

TV

 

 

 

 

 

MENU

 

 

 

Language:

English

?

 

 

AV

A

 

 

 

 

 

B

 

 

AV

 

 

 

 

 

 

further

 

6 9 6 + 0 5 A - G B

 

store ?

 

OK

 

 

 

 

 

Explanation

The desired language for the entire TV menu is adjusted in the „Equipm.Configuration“ menu.

Select the desired language with the

-

+

keys when

 

 

the submenu for the language is displayed on a green background.

Press the OK key to confirm and store the selection made. The complete text in the TV menu is then displayed in the selected language.

OK

TV

TV picture

1.3 Backlight (only Protos)

An innovation on the Protos models is the backlight integrated into the rear cover. This provides optimum room illumination for watching

TV.

 

 

 

The backlight can be switched on and off with the

key on the remote control when the TV set is switched on or in standby mode.

Switching on/off:

Press the

key.

 

Dimming:

The brightness of the backlight can be adjusted from DIM 09 to DIM 40

Adjusting the brightness:

- Press and hold the

key until the DIM value appears in the display (e.g. Dim40)

-The brightness can now be gradually adjusted with the - + keys.

The brightness setting is stored and remains active until it is changed again.

(Technical fault - see notes on page 67)

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Spectral-MF PIP Hints for use of the Operating Instructions ContentsPRG 10 0 H z RD11Setting up Setting up and connectingConnecting the aerial External loudspeakersBacklight only Protos Turning the TV on and offLanguage selection in the TV menu Management Programme positionSelect programme position Next programmeNext 9 programmes Programme selectionPRG Programme scanning TV-menu TV menu and operator helpExample Colour and transmissionTV station table Direct channel entry Store the setting and return to TV pictureStation search Direct channel input Station searchAutostore function Station settingsSorted to countries AutostoreSorting stations Store the settingsPositions Return to TV pictureSelect the fine tuning function Fine tuningAdjust the fine tuning Adjust fine tuning within the range of -99 to +99 withCall the logo menu Allocating a station logoAny existing logo will be overwritten Select the first characterChanging individual sound settings Changing individual picture settingsControl Screen displays Explanation Audio standard valuesCall the TV menu Only for reception of Ntsc stationsFunction keys AssigningSelect the function for TV mode in this example „Subtitles Equipment configurationEquipm. configuration Settings forNew settings can be stored by pressing the OK key Prog. change settingsRGB priority For the example above Sound settingsSound settings Activate forced mono sound mode Volume adjustment and forced monoSet forced mono Yellow Our exampleCorrecting picture deviations Switch on the comb filter GreenStore all settings and return to TV picture Menu and adjust ChrominanceControl Call the second picture Change the picture formatCamcorder video recorder AV-recordingCall the AV menu Back to the exampleVideo rec AV recording Video recorder video recorderSwitch-on/off Reminder time Time settingsTime settings Call the „Time settings menuSwitch to standby mode Switch-on/offHallo Reminder time can be deleted with the C keyChildlock Switching onChildlock KeysEnter your personal code Switching offActivate the childlock With Key or with the ON/OFF keyTimer recording Recording with the timerTimers can be programmed up to 2 months in advance Call the „Timer recording menuHeadphones Connecting headphonesVolume Phones volumeBasic functions Hi TextCall Hi Text Select a subject Select a chapterPage-by-page paging Hi TextSelection by cursor Multiple pagesSelecting subpages If there are more than 5 subpages, the cursor whiteTopical or news-flash Direct page selectionReturn to last index Return to last indexReturn to normal font size Doubling the font sizeSelect the next page e.g Setting marksSet the first mark Set the second mark ServiceInfotext Mark by mark paging Factory setting is aFrom TV picture to the first mark Step forward to the next markMark 2 on text Erasing marksErase the mark Access to riddle solutions Riddle solutions keySubtitles AutomaticVariable Zoom Switch off the zoom functionSlow-motion 9x multipictureFilm in photo Tip Still pictureMagnifier Overview PIP functionCable TV reception Euro 1/2/3-socketCalling the PIP picture Picture-in-pictureChanging the programme position Swapping the pictures Turning off the PIP functionKey To switch off the PIP function, press the red key or TV keyPIP function Monitoring with a video camera Volume Operation without remote controlProgramme selection Press the + keys10 0 H z Audio = Sound Camcorder video camera CamcorderMetz cable Euro or Scart cable Video recorder, rear view Metz cableConnections Connecting peripheral equipmentExample Change the signal type Connecting externalDifferences between the signal types DevicesMenu return TV picture Connecting a video recorder via the aerial socketVideo recorders Store the setting and return to the TV pictureConnecting peripheral equipment Pay-TV decoder Call the submenu „Signal Video signalSelect video signal „via decoder Pay-TV decoderMaintenance and care Technical dataUpgrade kits Glossary Call the menu „Function keys Configuring NextviewThis menu shows the current settings for the function keys White Collecting Nextview dataNe with + P- keys Using NextviewSelecting subjects Recording a programmeSorting programmes Sort the programme maga- zine by subjectsRemedy No data available TV timer was programmedCause Connecting a Data Logic video recorder to your TV set What is Data Logic?Setting the TV set for Data Logic Data LogicMultiple pages Upgrade kitsIndex Cleaning notes for glossy surfaces Safety noteBacklight on the TV set Rare, exceptional cases, the backlight remains off whenMetz. Always first class
Top Page Image Contents