3.Switching on/off
1) Connect the TV to power outlet. Switch on the power switch located on the back of the TV | (See page 6, |
item 21 for location), if the power indicator is red, it means the TV is off now. You need to | press the |
POWER switch on the TV or the POWER button on the remote control to turn on the TV, and the power indicator will light up in blue.
2) Press the power switch or the POWER button on the remote control again to turn off the TV.
4.Signal source selection
Press the number
5.Air/Cable selection
In order to access this setting, you need to be in the Antenna (TV) source mode (press SOURCE button repeatedly). You can select the signal receiving method according to the following steps:
1) Press the MENU button to enter the main menu.
2) Press the [ 
or 
] button to select the item Search and press the
[ 
] button to enter Search menu.
3)Press the [ 
or 
] button to select the item Tuning Mode.
4)Press the [ 
] button to change the item among Air, Cable .
5)Press OK button to confirm your selection. Press OK again to exit from the menu.
6.Channel search
In order to access this setting, you need to be in the Antenna (TV) source mode (press SOURCE button repeatedly).
1) Press the MENU button to enter the main menu.
2) Press the [ 
or 
] button to select the item Search, and press the [ 
] button to enter Search menu.
3)Press the [ 
or 
] button to select the item Auto Search.
4)Press the [ 
] button to start auto searching for all available channels.
5)Once all the available channels have been memorized, you are now able to use the numerical buttons or channel + / - buttons to watch the channel number you desire.
Picture Parameters
7.Picture adjustment
1) | Press the MENU button to enter the main menu. | Britghtness | 50 | ||
2) | Press the [ | or | ] button to select the item Picture Parameters, | Contrast | 50 |
Saturation | 50 | ||||
| and press the[ | ] button to enter Picture Parameters menu. | Sharpness | 50 | |
| Color Temp | Normal | |||
3) | Press the [ | or | ] button to select the item you want to adjust. | Hue | 50 |
|
| ||||
4) | Press the [ | or | ] button to adjust the level. |
|
|
|
| ||||
5) | Press OK button to confirm your selection. Press OK again to exit from the menu. |
| |||
Audio Settings
8.Audio adjustment
1) | Press the MENU button to enter the main menu. | Treble | ||
2) | Press the [ | or | ] button to select the item Audio Settings, | Bass |
Balance | ||||
| and press the[ | ] button to enter Audio Settings menu. | HeadPhone | |
3) | Equalizer | |||
Press the [ | or | ] button to select the item you want to adjust. |
| |
4) | Press the [ | or | ] button to adjust the level. |
|
5) | Press OK button to confirm your selection. Press OK again to exit from the menu. | |||
50
50
50
Note 1: All buttons mentioned above are on the remote control unless indicated otherwise.
Note 2: For more detailed information, please refer to the pages that follow.