Learning about your new TV
Channel down / cursor down | POWER indicator | AV Video input |
Channel up / cursor up | Remote control sensor | Y PB/CB PR/CR input (Component) |
Volume down / cursor left | Headphone jack | PC VGA input |
Volume up / cursor right | CATV antenna input | DC POWER input |
TV / AV / PC input select | AV audio input L |
|
MENU button | AV audio input R |
|
POWER button (standby) |
|
Selecting a location for the TV
1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. 2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause
overheating, which may damage the TV.
Wall Mounting your TV
The LCD1504US is a VESA compliant LCD TV which means that it can be wall mounted using a standard VESA compliant mounting bracket. VESA compliant mounting brackets are available at your local electronics store. The sizing of the bracket should be 100mm x 100mm. Please consult the store you are purchasing the bracket from for details. Note that the base of the TV needs to be removed before attaching the wall mounting bracket. Simply place the LCD screen, face down, on a soft, cushioned, non slip, non abrasive surface, making sure that it cannot slip or slide. Now remove the screws that are holding the base in place.
Connecting your TV
Caution: Do not plug the TV in until you have finished connecting all of your equipment.
Connecting audio/visual equipment
Follow the instructions below to hookup a VCR, DVD, satellite receiver, camcorder, audio amplifier, etc.(cables not included).. Use the SOURCE button on your remote control to select signal sources.
ANT.IN |
| VIDEO | Y | PB | PR | |
L |
| R |
|
|
|
|
| AUDIO |
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 |
Pb Pr
C C
VCD, DVD, STB
VGA POWER
Connection Details:
Connect using AV inputs (RCA Composite) - Use 1, 2, 4
Connect using
Connect using Y Pb/Cb Pr/Cr inputs (Component) - Use 1, 2, 5, 6, 7