ITT 29-100-1 ST manual Connecting a DVD player

Connecting a DVD player

Via SCART

Make sure the TV and DVD player are both switched off.

Plug one end of the SCART lead (not supplied) into the back of the DVD player and the other end into one of the SCART sockets on the back of the TV.

Switch on the DVD and the TV.

Via RCA lead (optional)

Make sure the TV and DVD player are both switched off.

Plug one end of the RCA lead into the video and audio out sockets on the back of the DVD player and plug the other end into the video and audio in sockets of the TV.

Press the AV button repetitively and AV select the AV3 (AV4 optional) mode.

Press theAV button on the remote AV control to select AV1, AV2 or AV3

correspond with SCART socket you are using on the back of the TV.

Note: Scart 1 and Scart 3 (optional) will give you RGB picture quality.

For DVD connections RGB capable scart sockets (AV1 or AV3) are recommended.

Via RCA lead and S-Video socket
You can also connect it through the	23

S-Video socket of the TV.

Plug the S-Video plug into the S-Video socket and the audio leads into the audio sockets.

AV	Press the AV button repetitively
	to select AV3-S or AV4-S (optional).

AV3/AV4

R

L

VIDEO

AV3/AV4

R

L

VIDEO

R

AUDIO OUT

LAV3

AV1

AV2

S-Video In