Copying Your Tapes (Dubbing)
Connection
(Rear connection shown.)
VCR
(HiFi)IN FROM ANT. VCR
(HiFi)
TV
OUT TO TV
|
|
| R |
| R |
| L |
| L |
|
|
AUDIO OUT |
| R |
|
| L |
| |
| AUDIO IN |
|
|
| VIDEO OUT | VIDEO IN | VHF/UHF |
|
|
Front of VCR
VIDEO IN 2 L-AUDIO IN2-R
| (Front Audio L/R Video IN jacks |
| are also provided) |
1 | Connect VIDEO OUT jack on Playing VCR to VIDEO IN jack on Recording VCR. |
| To monitor the dubbing, also connect a TV as shown. |
2 | Connect AUDIO L/R OUT jacks on Playing VCR to AUDIO L/R IN jacks on Recording VCR. |
| In place of a Playing VCR, you can use other equipment, such as a Camcorder. |
| Simply connect the unit’s Audio/Video outputs to the Recording VCR. |
|
| Playing (Source) VCR | Recording (Editing) VCR | |
1 | Insert | Insert blank tape with record tab. | ||
|
|
|
|
|
2 |
|
|
| Press INPUT* to set VCR Input mode to LINE1 |
|
|
|
| |
|
|
|
| for Video Input (Rear) or to LINE2 for Video Input |
|
|
|
| (Front). (See “Selecting the Input Mode” below.) |
|
|
|
|
|
3 | Press PLAY, then PAUSE/SLOW | Press REC, then PAUSE/SLOW immediately to | ||
| immediately to enter PLAY/PAUSE mode. | enter REC/PAUSE mode. |
The operation of steps 4 and 5 must be done on both playing and recording VCRs at the same time.
4 Press PLAY to start dubbing. Playing VCR starts playback.
Press PAUSE/SLOW to start dubbing. Recording VCR starts recording.
5 Press STOP to stop dubbing. | Press STOP to stop dubbing. |
To Monitor Dubbing on Your TV
1Turn your TV on and tune to the Recording VCR channel (CH3 or CH4).
2Set the VCR/ TV Selector on the Recording VCR to “VCR.”
Note • Dubbing tapes protected with Copy Guard will have poor quality results.
Selecting the Input Mode
Method 1:
Press INPUT repeatedly.
Channel Number ↔ LINE1 ↔ LINE2
Method 2:
Press CH / .
Display will change as below.
123
(CABLE) (TV) LINE2LINE1125 or 69
•“L1” or “L2” lights on
•LINE1: For rear audio/video connection.
LINE2: For front audio/video connection.
Caution : Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.
- 9 -