Setup menus (continued)
USER menu <BASIC>
No./Item |
| Description |
|
| |
001 | This selects the buttons which can be | |
| operated on the front panel when the | |
LOCAL ENA | CONTROL switch has been set to | |
| REMOTE. | |
| 0000 | DIS : |
| No buttons can be operated. | |
| 0001 | ST&EJ : |
| Only the STOP and EJECT buttons | |
| can be operated. | |
| 0002 | ENA : |
| All buttons can be operated. | |
|
| |
002 | This selects the 12 or 24 hour display | |
TAPE TIMER | for the CTL counter. | |
|
| |
| 0000 | ±12h : 12 hour display |
| 0001 | 24h : 24 hour display |
|
| |
003 | This selects whether the remaining | |
| tape time and total tape length are to | |
REMAIN SEL | be displayed in the superimposed | |
| display of the VIDEO MON connector | |
| signals. | |
| 0000 | OFF: No display. |
| 0001 | 2L : |
| The remaining tape time is displayed | |
| on the second line. | |
| 0002 | 1L : |
| The remaining tape time is displayed | |
| on the first line. | |
| 0003 | R/TTL : |
| The remaining tape time is displayed | |
| on the first line, and the total tape | |
| length is displayed in the second line. | |
| Notes: | |
| • When “2L” is selected, the remaining | |
| tape time is not displayed if “TIME” or | |
| “VITC” has been selected as the setup | |
| menu item No.008 (DISPLAY SEL) | |
| setting. | |
| • When “R/TTL” is selected, the total tape | |
| length is not displayed if “TIME” or | |
| “VITC” has been selected as the setup | |
| menu item No.008 (DISPLAY SEL) | |
| setting. | |
|
|
|
The underlined items indicates the initial setting.
No./Item | Description |
008This selects what information is to be provided by the time code and other
DISPLAY SEL super displays output to the VIDEO MON connector.
0000 TIME : Data only.
(The data indicates the value for whichever of CTL, TC or UB currently selected by the COUNTER button.)
0001 T&STA :
Data and operation status.
0002 T&S&M :
Data, operation status and mode. 0003 T&RT : Data and REC TIME
0004 T&YMD :
Data and REC DATE (year/month/day)
0005 T&MDY :
Data and REC DATE (month/day/year)
0006 T&DMY :
Data and REC DATE (day/month/year)
0007 T&UB :
Data and user bit.
However, when UB has been selected with the COUNTER button, the time code is displayed after the user bit.
0008 T&CTL :
Data and CTL data.
However, when CTL has been selected with the COUNTER button, the time code is displayed after the CTL data.
0009 T&T :
The data and time code recorded in the VAUX area are displayed.
0010 VITC:
The time code and user bit recorded in the VAUX area are displayed.
Notes:
•Mode display:
DVCPRO (25 Mbps) = DVCPRO, DV = DV, DVCAM = DVCAM
•An error message appears if a warning or error has occurred when “T&S&M” has been selected as this setting.
•REC TIME and REC DATE are displayed during DV/DVCAM, playback only. With the DVCPRO (25 Mbps) format, the operating mode is displayed.
21