Panasonic NV-FJ630AM To Play back S-VHS Cassette Tape SQPB=S-VHS Quasi Playback

Page 13

Playback

Preparations

Confirm that the VCR is on.

Confirm that the TV is on and the VCR viewing channel is selected.

Insert a recorded video cassette.

For Normal Playback:

VCR display

Press the Play button 7.

For Cue or Review Playback: During playback, tap the Fast Forward button G or the Rewind button 8.

– To return to normal playback, press the Play button 7.

– If you press and hold down the Fast Forward button G or the Rewind button 8, cue or review playback continues for as long as you keep the button pressed, and operation returns to normal playback when the button is released.

For High speed Cue or Review Playback (JET SEARCH): During playback, tap the Fast Forward button G or the Rewind button 8 twice.

For Still Playback:

During playback, press the Pause/Slow button J.

To return to normal playback, press

the Play button 7 or the Pause/Slow button J.

For Slow Playback:

During playback, keep the Pause/Slow button J pressed for 2 seconds or more.

To return to normal playback, press the Play button 7.

Fast-forwarding or Rewinding the Tape:

Press the Fast Forward button G or the Rewind button 8 in the stop mode.

To stop fast-forwarding or rewinding, press the Stop button

F.

To Obtain a Higher Speed Rewind (Jet Rewind):

Press the JET REW button H.

The [J : REW] indication appears on the TV screen and VCR display.(except when the remaining tape time indication appears)

Depending on a cassette or an operating condition, the rewind speed may change somewhat.

The tape counter is reset to [0:00.00] when the tape is rewound to the beginning.

To Stop Playback

Press the Stop button F.

Notes:

JET SEARCH, Cue, review or slow playback will be automatically cancelled after 10 minutes, and still playback after 5 minutes.

During playback function other than normal playback, horizontal noise bars may appear in the picture, the colour of the picture may be unstable, or the picture may be otherwise distorted.

When you play back a tape recorded in the LP mode, the picture may be in black and white.

When you play back a tape recorded in the EP mode, the picture and the sound may be unstable.

However, these are not malfunctions.

To Play back S-VHS Cassette Tape (SQPB=S-VHS Quasi Playback)

It is also possible to play back tapes recorded in the S-VHS system.

Some picture noise may occur depending on the type of tape used.

It is not possible to fully obtain the high resolution that S-VHS is capable of.

It is not possible to record in the S-VHS system with this VCR.

To Play Back a Recorded Part Repeatedly

Press the REPEAT button P.

Repeat Playback function does not work during Play-Off Timer.

To Cancel the Repeat Playback Mode:

Press the Stop button F.

To Stop Playback Automatically (Playback Off Timer Function)

If you set the playback duration, the playback will stop automatically.

After the set playback time has elapsed, the VCR automatically stops playback and switches off.

To Activate the Playback Off Timer Function:

During normal playback, press the Play button 7 on the VCR for more than 2 seconds to put the VCR in the Playback Off Timer mode.

After that, press the Play button 7 on the VCR repeatedly until the desired playback duration is displayed on the VCR display.

Repeatedly pressing this button changes the indication in the following order:

Counter display

30

60

(normal playback mode)

(min.)

(min.)

240

180

120

90

(min.)

(min.)

(min.)

(min.)

The VCR will automatically switch off when Play-Off Timer is completed. To turn the VCR on again, press the POWER button 1.

Notes:

The Play-Off Timer function works during normal playback.

When the tape reaches its end during Play-Off Timer, the tape will be rewound to the start and the VCR will turn itself off.

To Stop Midway:

Press the Stop button F.

13

Image 13 Contents
NV-FJ630AM ContentsLongrun Head System InformationD e Controls and ComponentsTV Operation VCR OperationConnections Setting the Remote Control to Operate Your TVBasic Connections To Change the RF output Channel Tuning the TV to Your VCRPress the Menu button U OperationsAuto Tuning Using the On Screen Display Plug in Auto TuningStoring TV Broadcasts in Your Direct Tuning Manual Tuning ProcedureFine Tuning Procedure Follow steps 1 to 3 of Manual Tuning ProcedureExample To Add and Delete the ChannelProgramme Programme Position Channel Setting the Clock of Your VCR Language Setting On Screen Display Time Reset Function At the set time HM pointTo Make Various Indicators Appear On Screen Display Settings Using the On Screen DisplayTo Set the Colour TV System Option Setting Playback To Stop Playback Automatically Playback Off Timer FunctionTo Play back S-VHS Cassette Tape SQPB=S-VHS Quasi Playback To Play Back a Recorded Part RepeatedlyTo Eject Video Cassette Using the Remote Control To Playback in the Desired Picture Quality Picture ModeNtsc Playback Convenient Automatic FunctionsRecording To Perform an OTR Recording To Perform Direct TV RecordingRecording VCR Recording from an external sourceAV2 Video in Y / Audio in Z To Suspend the Timer Recording Standby Mode Timer RecordingWeekly Timer Recording Daily Timer RecordingChecking a Timer Programme Timer Recording from an External Signal SourceSetting other Programmes in Succession Cancelling a Timer ProgrammeJet Navigator Search FunctionsTo Set the Category To Cancel the Index Search or to Stop Playback When Recording Over the Same Location on a TapeTo Demonstrate the Jet Navigator Function To Check the Recorded Programming Data Time Stamp FunctionMessage of On Screen Display Before Requesting ServiceVCR will not operate correctly Playback will not operate correctlyDirt on the video heads Adjusting the Playback PictureSpecifications