Panasonic NV-MV21 Series specifications TV Operation, Basic Connections

TV Operation

Only Panasonic TVs can be operated with the provided remote control.

The settings for operating the TV with the remote control have already been made.

No additional settings need to be performed.

However, some Panasonic TVs cannot be operated using this remote control.

(17)[TV-ON/OFF]

To switch the TV on from standby mode (OFF) or vice versa. On some TVs it is only possible to switch the TV to standby mode (OFF) with this button, but not on. In this case, try to tune the TV on with one of the following buttons:

[AV] (2) [Channel] (18)

(2)[AV]

To select the desired programme position (TV station) on the TV.

(18)[Channel]

To switch desired AV input on the TV.

(19)[VOLUME]

To adjust the volume of the TV.

Note:

•You cannot operate TV channels with [Numeric] (3). When you want to change the channel, press [Channel] (18) on TV operation part.

Connections

This section shows you how to connect the VCR to an aerial, TV, etc.

Basic Connections

The following connections are required to record and play back the video cassette through the TV.

		(1)
	(3)	(2)
		(4)
	AC IN ~	2 IN
(6)	VIDEO2
	AUDIO2	2 OUT
	IN (AV1) OUT	RF
		(5)
	¢
(1) Aerial (Not supplied)		(6) AC Input socket (40)
(2) TV Set (Not supplied)		¢ To mains supply

(3)Aerial Connector

(4)RF IN socket (43)

(5)RF OUT socket (46)

Connection to a TV using the Audio/Video Input Socket:

Set the RF output channel of the VCR to [ss] (RF OFF) when the VCR is connected to the TV via the Audio/Video cable. (See page 5.)

				(1)
		(3)	(2)
		(4)	(5)
			(6)	(7)
	AC IN ~		2 IN
	(10)	VIDEO2
		AUDIO2	2 OUT
		IN (AV1) OUT	RF
		(9)		(8)
	¢
(1)	Aerial (Not supplied)		(8) RF OUT socket (46)
(2)	TV Set (Not supplied)		(9) VIDEO OUT (42)/
(3)	Aerial Connector		AUDIO OUT (45)
(4)	VIDEO IN		(10)AC Input socket (40)
(5)	AUDIO IN		¢ To mains supply

(6)Audio Cable/Video Cable (Not supplied)

(7)RF IN socket (43)

4