Panasonic NV-HV62GL To Display the Approximate Remaining Tape Time, To reset the tape counter

To Display the Approximate Remaining Tape Time

The remaining tape time can be displayed in the VCR display.

1Select [TAPE SELECT] from the On Screen Display and select the corresponding video cassette tape length. See page 8.

2Press [STATUS/ NAVI CHECK] (32) repeatedly until the Remaining Tape Time appears on the VCR display.

REMAIN

SP

Important Note for the NICAM System

When NV-HV62GN is switched on, the tuner will automatically switch to a NICAM broadcast, if NICAM is being transmitted. At this time the NICAM signal is transmitted on stereo channels only, since the M1 and M2 formats are not yet available. Even if the sound track is MONO, the stereo indicator will appear.

To Record the Present Date and Time (OSD Recording) on the same screen as the picture

This function allows you to record the present date and time on the same screen as the picture being recorded.

For certain cassettes, the remaining tape time may not be displayed correctly.

To reset the tape counter

Press [RESET] (31) to reset the tape counter (elapsed time) to [0:00].

•The tape counter is automatically reset to [0:00] when a video cassette is inserted.

•The tape counter is reset to [0:00] when you operate the Jet Rewind function and the tape is rewound to the beginning.

Operations

1Set [OSD REC] to [ON]. (See page 9.)

2Press [REC] (15) ([REC/OTR]

(39)).

3Press [STOP] (12) to stop recording.

Note:

2 0 : 1 5 . 5 4

1 6 . O C T . 2 0 0 5

Notes:

•When playing back a cassette recorded in the LP or EP mode, some pictures and sound distortion may occur. However, this is not a malfunction.

•The recording pause mode will be automatically cancelled after 5 minutes and return to the stop mode.

•The tape recorded in the EP mode on this VCR cannot be played back on the other VCR without EP mode function.

•On the other VCR (even with EP mode function), when you play back the tape recorded in the EP mode, the picture and the sound may be distorted. However, this is not a malfunction.

Recording of Stereo or Bilingual Programmes (NV-HV62GL only)

1Recording is automatically made in the stereo or bilingual mode. This prevents errors in the selection of the dubbed or the original language.

2During playback press [AUDIO] (22) to select the desired sound mode. (See page 7.)

The NICAM Broadcast System (NV-HV62GN only)

NV-HV62GN is equipped with the NICAM sound system. NICAM is a 2 channel sound broadcast system to provide either a high quality stereo sound track or 2 independent MONO sound tracks, M1 and M2.

NICAM programmes are always accompanied by standard sound broadcasts and you can select the desired sound with [AUDIO] (22) during playback.

•The NICAM digital stereo sound can only be recorded on the Hi-Fi audio track.

•When NICAM programme is being received, the indicators are lit to inform you the type of broadcast. (See page 7.)

•To record the regular sound (ordinary normal sound) on the FM audio tracks when a NICAM programme is received, set [MONAURAL] to [ON]. (See page 9.)

•To hear stereo performance connect as shown on page 4 to a TV or Stereo Amplifier with left and right audio inputs.

•This function is also activated for OTR recording and Timer recording.

To Select the Recording Duration and Perform Timer Recording (OTR Recording)

OTR means One-Touch Recording and is called this way, because you can start recording and select the recording duration by repeatedly pressing a single button. This is very convenient, for example when you want to start recording immediately but need to go out or want to go to bed.

After the selected recording duration has elapsed, recording stops and the VCR automatically switches off.

To Perform an OTR Recording:

1Display the VCR picture on the TV.

2Insert a video cassette with an intact erasure prevention tab.

3Press [CH] (20) to select the programme position on which the TV programme to be recorded will be broadcast.

4Press [REC/OTR] (39) to start recording.

5Press [REC/OTR] (39) repeatedly to select the desired recording duration.

•Every time you press this button, the recording duration indicated in the VCR display changes in the following order.

•For example, if you select [30], the VCR records a programme for 30 minutes.

Counter display (normal recording mode) # 30 (min.) # 60 (min.) # 90 (min.) # 120 (min.) # 180 (min.) #

240 (min.) # Counter display (normal recording mode)

To Stop the OTR Recording Before the End:

Press [STOP] (12).

Notes:

•The OTR function works during normal recording.

•When the tape reaches its end during OTR recording, the VCR will turn itself off.

11

LSQT0869