Panasonic AJ-D455 manual Basic

Setup menus

USER menu

*The SERIAL OUT 3 con- nector functions only when the AJ-YA455P serial interface board (optional accessory) is used.

<BASIC>

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display			display
000	P-ROLL	0000			0S	This sets the preroll time which can be set from 0 to 15 seconds
		.		.
	TIME	.		.		in 1-second increments.
		.		.
		0005			5S	<Note>
		.		.
		.		.		The unit will not operate if the preroll time is set to 0 seconds
		.		.
		0015			15S	when the unit is set to automatic editing (PREVIEW, AUTO
						EDIT COMMAND) from an external controller.
001	CHARA	0000		0		This sets the position of the characters on the horizontal plane
		.		.
	H-POS	.		.		for the time code and other super displays output to the
		.		.
		0004		4		VIDEO OUT 3/SERIAL OUT 3* connector.
		.			.
		.		.		<Note>
		.		.
		0016		16		When setting this item, the DISPLAY SEL status is output to
						VIDEO OUT 3/SERIAL OUT 3* even if SUPER OFF has been
						set. However, when the menu is exited, operation complies
						with the SUPER OFF/ON setting.
						Also, CHARA TYPE is output to VIDEO OUT 3/SERIAL OUT 3*
						according to the status set in the menu.
002	CHARA	0000		0		This sets the position of the characters on the vertical plane
		.		.
	V-POS	.		.		for the time code and other super displays output to the
		.			.
		0018		18		VIDEO OUT 3/SERIAL OUT 3* connector.
		.			.
		.		.		<Notes>
		.		.
		0022		22		1. When setting this item, the DISPLAY SEL status is output
						to VIDEO OUT 3/SERIAL OUT 3* even if SUPER OFF has
						been set. However, when the menu is exited, operation
						complies with the SUPER OFF/ON setting.
						Also, CHARA TYPE is output to VIDEO OUT 3/SERIAL
						OUT 3* according to the status set in the menu.
						2. When the DISPLAY SEL setting causes characters to
						extend beyond the edges of the screen, the setting value is
						changed so that the characters are automatically displayed
						in a position on the screen.
003	DISPLAY	0000			TIME	For selecting the time code and/or other information which is to
	SEL	0001			T&STA	be shown on the superimposed display at the VIDEO OUT 3/
		0002		T&S&M		SERIAL OUT 3* connector.
		0003			T&RT	0: Time only
						1: Time and operation mode
		0004		T&YMD
						2: Time, operation mode and mode
		0005		T&MDY
						3: Time and REC TIME
		0006		T&DMY
						4: Time and REC DATE (year/month/day)
						5: Time and REC DATE (month/day/year)
						6: Time and REC DATE (day/month/year)
						<Notes>
						1. The mode display is DVCPRO during DVCPRO playback,
						DV during DV playback, and DVCAM during DVCAM
						playback.
						2. When 2 (T&S&M) is set, an error message will appear
						when a warning or error has occurred.
						3. REC TIME and REC DATE are displayed during DV or
						DVCAM playback only. The operation mode is displayed
						during DVCPRO playback.
004	LOCAL	0000			DIS	This selects the buttons which can be operated on the front
	ENA	0001			ST&EJ	panel when the REMOTE/LOCAL switch has been set to
		0002			ENA	REMOTE.
						0: No buttons can be operated.
						1: Only the STOP and EJECT buttons can be operated.
						2: All buttons can be operated.

The underline on the setting item denotes the initial setting.

22