Pelco PMCL-V200 important safety instructions Adapter Plate PMCL-WM1A Monitor Mount

To attach the PMCL-V200 to a monitor mount:

1.Use the 10-32 x 3/4-inch flat head Phillips screws, #10 split lock washers, and hex nuts (supplied) to secure the adapter plate to the monitor mount. Refer to Figure 1.

ADAPTER PLATE

PMCL-WM1A

MONITOR MOUNT

10-32X3/4

PHILLIPS SCREW

HEX NUT

#10 SPLIT LOCK WASHER

Figure 1. Attaching the PMCL-V200 Monitor Mount Adapter to a Monitor Mount

2. Attach the monitor mount to the monitor. Refer to Figure 2 and do one of the following:

•31-inch monitor or smaller: Align the monitor to the correct hole pattern on the mounting plate. Use the M4 x 10 mm screws and split lock washers (supplied) to secure the monitor to the mounting plate.

or

•Monitors larger than 31-inches:Align the monitor to the outside hole pattern of the monitor plate. Use the M6 x 12 mm screws and flat washers (supplied) to secure the monitor to the mounting plate.

PMCL-WM1A

MONITOR MOUNT

PMCL-V200

ADAPTER PLATE

#8 SPLIT

LOCK WASHER

M4X10MM

PHILLIPS SCREW

Figure 2. Attaching the PMCL-V200 Adapter and Monitor Mount to a Monitor

3. Refer to the manual shipped with the monitor mount for further instructions.

2 C2228M-C (7/07)