Pelco DX8UP-512MBRAM installation manual Removing Power Cord from Unit

Page 3

Figure 3. Removing Power Cord from Unit

5.Ensure that the DX8000 Series DVR and all of its components are protected against electrostatic discharge (ESD). Before handling any electronic components, you should take steps to ground yourself properly so that any built-up static electric charges are dissipated away from the unit. The most effective method for combating ESD is to use a properly grounded wrist strap.

NOTE: If you do not have access to a grounded wrist strap, you can discharge any built-up static by periodically touching an unpainted section of the chassis.

Figure 4. ESD Protection

C2612M-A (6/06)

Image 3

Contents DX8UP-512MBRAM Tools Needed Parts ListIntroduction Getting ReadyRemoving Power Cord from Unit Open the Unit Chassis Prepare Unit for RAM InstallationDX8000 Interior Component LayoutInstall the DX8UP-512MBRAM Memory Module Seating and Securing the Dimm Module Seating and Securing the Dimm Module Reassemble the Unit System Icon Increase Paging File Memory SizeProduct Warranty and Return Information ISO9001