KEYBOARD FEATURES AND FUNCTIONS WITH DX4500/DX4600
The KBD300A provides the following features for use with the DX4500/DX4600 Series DVR.
JOYSTICK
When the SHIFT LED is off (not lit), you can perform the following camera operations:
•Control the camera’s PTZ function.
–Twist the joystick clockwise to zoom in and counterclockwise to zoom out.
–Move the joystick to stop a pattern.
•Move the cursor in the
–Menu tree: Moves the cursor up and down through the
–Parameter selection: Sequences through the parameter choices.
When the SHIFT LED is on (glows), use the joystick to easily select a camera pane.
NEAR/FAR AND OPEN/CLOSE
The NEAR/FAR and OPEN/CLOSE keys allow you to control the lens and navigate the
When the SHIFT LED is off (not lit), you can view video in the camera pane with the following commands:
•NEAR/FAR: Press and hold these keys to zoom the lens in or out.
•OPEN/CLOSE: Press and hold these keys to open or close the iris to lighten or darken the video.
While displaying the
•NEAR/FAR: Quickly press and release these keys to move the cursor up or down through the camera menu.
•OPEN/CLOSE: Quickly press and release the OPEN key to select a menu item; quickly press and release the CLOSE key to move the cursor to the Exit command.
CAM
When the SHIFT LED is on (glows), press a number and the CAM key to assign the selected camera to the first view pane. The remaining view panes are positioned in numerical order. For example, if channel 06 is the first view pane, channel 07 is displayed in the second view pane, and so forth.
PRESET
The PRESET key allows you to call up and configure camera presets. When the SHIFT LED is off (not lit), use the numeric keypad and the PRESET key to perform the following commands:
•Press and release a number, and then quickly press PRESET to move the camera to the configured preset position.
•Press and release a number, and then press and hold PRESET for two seconds to program the current camera position to a supported preset number. Preset 95 displays the camera menu.
For more information about camera presets, refer to the documentation supplied with the camera.
PATTERN
The PATTERN key allows you to run both long and short camera patterns.
•Run a pattern: When the SHIFT LED is off (not lit), press and release a number, and then quickly press PATTERN to run a selected program. The DX4500/DX4600 supports up to four unique PTZ patterns.
•Program a pattern: When the SHIFT LED is off (not lit), press and release a number, and then press and hold PATTERN for two seconds to start the pattern recording mode.
For more information about camera presets, refer to the documentation supplied with the camera.
ACK
When the SHIFT LED off (not lit), press the ACK key to stop the pattern recording mode.
16 |