Pelco C293M-B (1/09) manual Specifications, Mechanical, General

Specifications

MECHANICAL

Construction	Cast aluminum
Finish
SWM-GY	Gray polyester powder coat
SWM-BK	Black polyester powder coat
Mount Method	Mount is secured by a set screw to a mounting cleat that is
	attached to a surface with two fasteners (not supplied). A gasket
	is affixed to the base to protect the interior from moisture. An
	adjustment plate is provided to allow the wall mount to be
	shimmed when the mounting surface is not plumb. The lower
	hole in the mounting cleat is elongated, which allows for vertical
	alignment adjustment.
Dome Mounting	1-1/2-inch NPT pipe thread in mount tip. Anti-seize lubricant is
	supplied to be applied to the pipe threads.
Cable Entry	One cable feedthrough hole in the mounting cleat. Cable feeds
	through the mount into the pendant dome.
Maximum Load	10 lb (4.5 kg)

GENERAL

Environment	Indoor/outdoor
Weight
Unit	1.1 lb (0.50 kg)
Shipping	2.0 lb (0.91 kg)

(Design and product specifications subject to change without notice.)

2.54

(6.45)

6.25

(15.88)

4.15

(10.54)

3.10

(7.87)

NOTE: VALUES IN PARENTHESIS ARE CENTIMETERS; ALL OTHERS ARE INCHES.

Figure 3. Dimension Drawing

6 C293M-B (1/09)