Sony PFM-42X1N manual Answer Normal message, Error message, Normal code

7. Answer

(a)Normal message

Answer

Header	0x70	Normal answer header
Category	0xXX	Code table (7-a) : Normal code

Code table (7-a)

	Normal code
0x00	Completed	Normal response.
0x01	Limit over	The packet was received normally, but the data value was over the upper
		limit.
		Forcedly the monitor adjusted the data to maximum value.
0x02	Limit under	The packet was received normally, but the data value was under the lower
		limit.
		Forcedly the monitor adjusted the data to minimum value.
0x03	Command cancelled	The packet was received normally, but the command was cancelled because
		the function was not in adjustable mode, such as a function displayed as “—
		—” in user menu.
0x04	Command all enable	The packet was received normally.
		The command function is all enable.
0x05	Fail	The packet was received normally, but the command was cancelled .
		Please retry.

(b)Error message

Answer

Header	0xE0	Error answer header
Category	0xXX	Code table (7-b) : Error code

Code table (7-b)

	Normal code
0x00	No function error	Packet header,category or function codes do not exist in this protocol.
0x02	Data number error	The data value in “Data num” area of received packet was different from the
		function’s own data number.
0x06	Mode error	The monitor is already in the service mode via remote commander
		operation.
		(The service mode through IR remote has priority over the serial remote
		command. )
0x07	Time out	Packet communication are interrupted by some error, and did not return to
		normal communication within 2 seconds.

PFM-42X1/42X1N 1-19