Sony PN50A550SF manual Connecting a VCR, Connecting a S-Video

Page 5

Connecting a VCR

TV Rear Panel

TV Side Panel

VCR Rear Panel

Audio Cable

2



(Not supplied)

Video Cable (Not supplied)

 

 

Antenna Cable (Not supplied)

 

 

1

Unplug the cable or antenna from

the back of the TV.

Connect the cable or antenna to

 

the ANT IN terminal on the back of

 

the VCR.

 

Connect an Antenna Cable between

 

the ANT OUT terminal on the VCR

2

and the ANT IN terminal on the TV.

Connect a Video Cable between the

VIDEO OUT jack on the VCR and

the AV IN 1 [Y/VIDEO] or AV IN 2

3

[VIDEO] jack on the TV.

Connect Audio Cables between the

AUDIO OUT jacks on the VCR and

the AV IN 1 (or AV IN 2) [R-AUDIO-

4

L] jacks on the TV.

Press the SOURCE button on

the remote control until you see

the VCR signal (see “Viewing an External Signal Source” on page 11).

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

Connecting a S-Video

TV Rear Panel

VCR Rear Panel



S-Video Cable (Not supplied)

2

Audio Cable (Not supplied)

TV Side Panel

1

To begin, follow steps 1 in the

 

 

 

 

previous section to connect the

 

 

 

 

antenna or cable to your VCR and

 

 

 

 

2

your TV.

 

 

 

 

 

 

 

 

Connect an S-Video Cable between

 

 

 

 

 

 

 

 

the S-VIDEO OUT jack on the VCR

 

 

 

 

and the AV IN 2 [S-VIDEO] jack on

 

 

 

 

3

the TV.

 

 

 

 

Connect Audio Cables between the

 

 

 

 

AUDIO OUT jacks on the VCR and

 

 

 

 

the AV IN 2 [R-AUDIO-L] jacks on

 

 

 

 

4

the TV.

 

 

 

 

 

 

 

 

 

 

 

 

Press the SOURCE button on the

 

 

 

 

 

 

 

 

remote control until you see the VCR

 

 

 

 

signal (see “Viewing an External

 

 

 

 

 

Signal Source” on page ).

An S-Video may be included with your VCR. (If not, check your local electronics store.)

Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

English - 5

Image 5
Contents Video Input Performance Comparison Rear & Side Panel JacksRemote Control Buttons Connecting to DVI Digital Visual Interface Connecting to Y, PB, PR Connecting a CamcorderConnecting a S-Video Connecting a VCRConnecting a Digital Audio System Using the HDMI/DVI Cable Connecting a PCUsing the D-Sub Cable Turning the TV On and Off Selecting the Video Signal-sourceMemorizing the Channels Viewing the MenusPicture Mode Customizing the Picture SettingsPicture Control Viewing All ChannelsTools Option Displays the Edit Name and Information menus To Select the SourceSource, then press the Enter button Problem TroubleshootingWeb Site Address Contact Samsung WORLD-WIDECountry