Sony KDL-40S2510 manual Analogue Set-up menu Analogue mode only, Digit Direct, Auto Tuning, 28 GB

Analogue Set-up menu (Analogue mode only)

You can change/set the analogue settings using the Analogue Set-up menu. To select options in “Settings”, see “Navigating through menus” (page 19).

1 Digit Direct

When “1 Digit Direct” is set to “On”, you can select an analogue channel using one preset number button (0 - 9) on the remote.

Note

When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering two digits using the remote.

Auto Tuning

Tunes in all the available analogue channels.

Usually you do not need to do this operation because the channels are already tuned when the TV was first installed (page 5, 6). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters).

Programme Sorting	Changes the order in which the analogue channels are stored on the TV.
	1	Press F/f to select the channel you want to move to a new position,
		then press .
	2	Press F/f to select the new position for your channel, then press .
Programme Labels	Assigns a channel name of your choice up to five letters or numbers. The name will
	be displayed briefly on the screen when the channel is selected. (Names for channels
	are usually taken automatically from Text (if available).)
	1	Press F/f to select the channel you want to name, then press .
	2	Press F/f to select the desired letter or number (“_” for a blank space),
		then press g.
		If you input a wrong character
		Press G/g to select the wrong character. Then, press F/f to select the correct
		character.
		To delete all the characters
		Select “Reset”, then press .
	3	Repeat the procedure in step 2 until the name is complete.
	4	Select “OK”, then press .

28 GB