JVC HM-A22U, HR-A42U manual Select Program Number, SET Program, Information, Engage Timer Mode

Page 25

OK

2 3

q 5/8 6

MENU

CH

 

TIMER

1 2 3

NUMBER

 

4

5

6

 

 

 

NUMBER "9"

 

 

 

 

 

 

 

7

8

9

 

 

 

"8"

 

0

 

 

NUMBER

T

Y

 

 

 

 

 

2

4

 

3

 

q

 

5

OK

6

MENU

CH

 

25

SELECT PROGRAM

NUMBER

3 Press the appropriate NUMBER keys or CHto select a vacant program number, then press OK. The first time you do this, all numbers will be vacant, so just press OK when the screen appears.

 

SET PROGRAM

4

INFORMATION

Press the appropriate NUMBER keys to set the date,

start/stop time and channel number. Press CHto set

AM/PM and tape speed. Then press OK after AM/PM,

 

channel number and tape speed settings. The next

 

setting that can be set begins flashing.

 

 

 

Any information comprised of 1 digit (except the

 

channel number) should have a "0" entered before it.

 

It is possible to set all information using the CH

 

buttons. (In this case, press OK after each setting.)

 

NOTE:

 

If you are using a cable box, enter the cable box

 

channel, not the channel to be recorded. The channel

 

to be recorded must be selected on the cable box. (The

 

cable box channel is the VCR's channel that displays

 

the channels received by the cable box.)

 

 

 

** You can record selected programs at the same time

 

every weekday, or once a week. Before entering the

 

month, press NUMBER key “8” (DAILY) or “9

 

(WEEKLY). Either "DAILY" or "WEEKLY" appears.

 

Press again and "DAILY" or "WEEKLY" disappears.

 

 

 

MAKE CORRECTIONS

 

To change any of the settings, press OK until the item you

5 want to change begins blinking. Then set as in step 4.

 

RETURN TO NORMAL

 

SCREEN

 

Press MENU as many times as necessary.

EXAMPLE

If you program the VCR to timer record a show on September 6 on channel 40 from 12:00 noon to 1:00 PM in SP mode, the screen will look like this:

PROGRAM 1

DATE

9/ 6 SUN

START

12:00 PM

STOP

1:00 PM

CHANNEL

40 SP

PRESS NUMBER KEY(0-9) OR (5,°), THEN (OK)

PRESS (MENU) TO END

6

Press just once to access the Auto Timer screen

(pg. 27).

7

ENGAGE TIMER MODE

Press TIMER. The VCR turns off automatically.

NOTES:

To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

In case of a power failure after programming, the VCR’s memory backup keeps your selections for 10 minutes.

If you select "PROGRAM SET" without having set the date and time, an error message appears. Follow its instructions.

If you enter a start time that has already passed, ERROR appears on the screen and flashes.

Programs that start after midnight must have the next day’s date.

After timer recording is completed, the VCR’s power goes off automatically.

You can program the timer while a regular recording is in progress; the on-screen menu will not be recorded.

If the end of tape is reached during timer recording, the cassette is automatically ejected.

When timer-recording cable channels received through a Cable Box, be sure to keep the Cable Box set to ON.

Image 25
Contents HR-A42U HR-A22U Do not place the VCR Dear CustomerImportant Product Safety Instructions Should be moved with care. Quick Product and cart combinationContents Basic Connections Access Custom SET Access ON-SCREENTurn on the VCR MenuClock Setting Initial SettingsSelect Language Turn OFF the VCRSelect Host Channel Select Mode Select D.S.T. ModeMake Corrections Access Language Access Initial SETSelect Screen SET DATE, Time and D.S.T Access Clock SET ScreenAccess Tuner SET Access Main MenuAccess Band Screen TunerReturn to Normal Screen Perform Auto Channel SETPress Menu as many times as necessary Access AFC Screen Access Tuner SET ScreenAccess Manual Make SelectionLoad a Cassette Simple PlaybackFind Program Start Point Start PlaybackSimple Recording Playback FRAME-BY-FRAMEResume Normal During PlaybackAdjust Manual Tracking Engage Manual Tracking ModeRE-ENGAGE Automatic Tracking Manual TrackingLayback and Recording Features Access Function SETSuperimpose Skip Over Unwanted Sections Access Distant CodeStart Repeat Start SearchTape Position Indicator Counter ResetPress REW, then press Timer within 2 seconds Next-Function MemoryReset Counter to Zero Engage TV ModeRecording Select Channel for ViewingOn-Screen Timer Programming Instant Timer Recording ITREngage ITR Mode Access Program SET ScreenSelect Program Number Engage Timer ModeSET Program InformationAccess Program SET Disengage TimerCancel a Program RE-ENGAGE TimerAuto Timer Access Auto TimerEdit To Or From Another SET RECORDER’S Input Edit From a CamcorderMode PlayerSelect TV Brand Multi-Brand Remote ControlSpecial Feat Ures Make sure the window side is up, Remote control won’t function Batteries are dischargedTimer again Re-perform the set-up proceduresRoubleshooting Check the programmed data and rePlayback Quest Ions and Answers20C to 60C -4F to140F EIA monochrome signalMaximum recording time DA-4 Double Azimuth headIndex Search Insert Cassette ITR Instant Timer Recording Playback Program SettingSemi-Auto Clock Setting IndexFront View Front Display Panel Remote Control ProvidedFor Servicing HOW to Locate Your JVC Service CenterLimited Warranty WarrantyHR-A42/A22U