Troubleshooting Guide, Specifications, Maintenance

AUTO REWIND

When a tape has reached the end during recording, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the VCR will eject the tape and turn itself to off.

•The VCR will not rewind the tape automatically during timer recording or One Touch Recording.

•When the Counter Memory is activated, the tape will rewind to the M0:00:00 and the VCR will go into the Stop mode.

REAL TIME TAPE COUNTER

•This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change during blank portions on the tape.)

•The indication will appear when the tape is rewound further than “0:00:00” on the tape counter.

TROUBLESHOOTING GUIDE

If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem.

PROBLEM	CORRECTIVE ACTION

No power.	• Make sure the power plug is connected to an AC outlet.
	• Make sure the power is turned on.
Timer recording is impossible.	• Make sure the timer recording is set correctly.
	• Make sure the power is off.
	• Make sure the VCR clock is set correctly.
Cannot go into Record mode.	• Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.
Playback picture is partially noisy.	• Adjust tracking control for a better picture by pressing [CHANNEL (	) ] on the VCR.
Cannot view a tape but the	• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .
audio is OK.	• Make sure the VCR is not in the Menu mode.
No or poor playback picture.	• Select channel 3 or 4 at your TV, then press [VCR/TV] so that the VCR/TV
	indicator on the VCR comes on.
	• Fine tune your TV.
TV programs cannot be seen	• Re-check the ANT. IN and ANT. OUT connections. See page 3.
normally.	• Press [VCR/TV] so that the VCR/TV indicator on the VCR disappears.
No VCR operation from the	• Make sure the power plug is connected to an AC outlet.
infrared Remote Control.	• Check batteries in remote control.
Video or color fades in and out	• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
when making a copy of a video tape.

SPECIFICATIONS

Operating temperature :	5ºC~40ºC (41ºF~104ºF)	Power requirement :	120V, 60Hz
Converter output :	VHF Channel 3 or 4.	Power consumption :	14 Watts
		Dimensions :	W 14-1/4” (360mm)
			H 3-5/8” (92mm)
• Designs and specifications are subject to change			D 8-1/2” (216mm)
• Designs and specifications are subject to change		Weight :	4.4 lbs. (2.0 Kg.) (approx.)
without notice and legal obligation.

•If there is a discrepancy between languages, the default language will be English.

MAINTENANCE

SPECIAL

FEATURES

SERVICING

Should your VCR become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our help line at

1-800-242-7158,

to locate an Authorized Service Center.

CABINET CLEANING

•Wipe the front panel and other exterior surfaces of the VCR with a soft cloth immersed in lukewarm water and wrung dry.

•Never use a solvent or alcohol. Do not spray insecticide liquid near the VCR. Such chemicals may cause damage and discoloration to the exposed surfaces.

AUTO HEAD CLEANING

•Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

•Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your VCR may need to be cleaned.

1.Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.

2.If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-242-7158, to locate an Authorized Service Center.

NOTES:

•Remember to read the instructions included with the video head cleaner before use.

•Clean video heads only when problems occur.

TROUBLESHOOTING	GUIDE
SPECIFICATIONS	MAINTENANCE

– 7 –

F260LC specifications

The FUNAI F260LC is a state-of-the-art compact excavator designed for impressive performance and versatility in a range of construction and landscaping tasks. With its robust build and advanced technology, the F260LC is ideal for contractors seeking efficiency and reliability.

One of the standout features of the F260LC is its powerful engine. Equipped with a fuel-efficient diesel engine, it delivers ample horsepower while minimizing fuel consumption and emissions. This balance of power and efficiency ensures that operators can maximize productivity without compromising on environmental responsibilities.

The F260LC is designed with a compact size, making it perfect for work in tight spaces where larger excavators cannot operate effectively. Its short tail swing design enhances maneuverability, allowing for efficient operation in urban settings or confined job sites. This makes the F260LC particularly suitable for utility work, landscaping, and demolition projects.

Operator comfort and safety are prioritized in the design of the F260LC. The cab is spacious and ergonomically designed, featuring an adjustable seat, simple controls, and excellent visibility. These thoughtful design elements help reduce operator fatigue during long working hours. Additionally, advanced safety features, such as ROPS (Roll-Over Protective Structure) and FOPS (Falling Object Protective Structure), ensure that operators remain safe while working in demanding environments.

Technologically, the F260LC incorporates advanced hydraulic systems that enhance performance and responsiveness. The hydraulic system provides powerful lifting and digging capabilities, making it efficient for a variety of tasks, from trenching to material handling. The excavator is also compatible with numerous attachments, including buckets, hammers, and grapples, further expanding its functionality.

Another key characteristic is its maintenance-friendly design. The F260LC features easily accessible service points, simplifying routine maintenance tasks and reducing downtime. This focus on serviceability results in lower operational costs and ensures longevity.

In summary, the FUNAI F260LC combines a compact design, powerful performance, and advanced technology, making it an excellent choice for various excavating tasks. With a focus on operator comfort, safety, and ease of maintenance, this excavator stands out in the competitive landscape of compact machinery, providing exceptional value to contractors and operators alike. Whether used for construction, landscaping, or utility work, the F260LC promises reliability and efficiency on every job.