digital inputs of your SUPER DAC 2496. Take the analog outputs of the Super DAC and plug them into the analog inputs of your "target" device. For more information or suggestions for use, see the next section, "Typical Setup."
NOTE: For best results, use good quality digital cable. Digital AES/EBU cable should be purchased in a professional audio store and has
After all connections are made, power up your equipment. Start with your sound source, then the Super DAC, and then your audio target or sound system.
TYPICAL SETUP
Your SUPER DAC 2496 is capable of receiving digital audio in three different formats, AES/EBU on an XLR connector, S/PDIF on coaxial (RCA), and TOSLINK on an optical connector. The source of this digital audio could be a professional DAT deck, a computer digital I/O card, digital mixer, hard disk recorder, consumer DATs, Mini Disc, DVD or CD player.
Typical Setup Fig. 1 shows any of these devices monitored through a sound system.
Typical Setup Fig. 1
5