Basic Operation
Basic Playback
Preparation before playing:
1.Connect the DVD player to your TV and amplifier.
2.Turn on the TV.
3.Set the TV to the AV input connected to the DVD player.
4.Turn down the volume on your amplifier, and then power it on.
5.Set the amplifier to the AV input connected to the DVD player.
OPEN/CLOSE | PLAY | REV | FWD |
PAUSE | STOP |
|
|
PHONES
ON/OFF
PREV NEXT
STEP - Press the ON/OFF switch, and the player will start. "LOAD" is illuminated on the display and the logo is displayed on TV screen.
STEP 2 - Press OPEN/CLOSE button either on front panel or re- mote control, The player displays "OPEN” on the display. When the tray is open, please put the disc on the tray with the label side up. Press OPEN/CLOSE again to close the disc tray.
STEP 3 - Press the PLAY button on the front panel or remote control. The player will automatically read and identify the disc, display the type and total time, and begin playback.