DVP1100 DVD Player
:: Video Setup
The Video menu allows you to set your preferred aspect ratio for DVD movies and specify your Video connection method.
TV Aspect
TV Aspect adjusts the format of the video output to match your television and viewing preference. The aspect ratio of standard television screens is 4:3 (4 units wide to 3 units tall). Widescreen televisions are 16:9.
1From Stop mode, press SETUP.
2Select Video and press ENTER.
3Select TV Aspect and press ENTER.
4Select the desired TV Aspect and press ENTER:
Fullscreen (default) Select if you have a standard 4:3 television and prefer to watch
Letterbox Select if you have a standard 4:3 television and prefer to
watch widescreen versions of DVD movies (if available). Movies will display in letterbox format; i.e., black bars will appear above and below the picture.
Widescreen Select if you have a widescreen 16:9 television.
5Press SETUP to save and exit.
Video Output
Set Video Output to match the method you used to connect to your TV.If you used Composite Video, you do not have to adjust this setting.
1From Stop mode, press SETUP.
2Select Video and press ENTER.
3Select Video Out and press ENTER.
4Select the desired Video Out and press ENTER:
Component Select if you connected the DVD player to your TV using the Component Video output.
5Press SETUP to save and exit.
12