LOREX Technology SG-7960 manual Use, Service, Periodic Inspection and Maintenance, System Down

Page 4

Use

14Cleaning – Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

15Object and Liquid Entry – Never push objects of any kind into this video product through openings as they may touch dangerous voltage points or “short-out” parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.

16Lightning – For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power line surges.

Service

17

Servicing-Do not attempt to service this video product yourself as opening or removing covers

 

may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service

 

personnel.

18

Conditions Requiring Service-Unplug this video product from the wall outlet and refer servicing

 

to qualified service personnel under the following conditions.

 

A. When the power-supply cord or plug is damaged.

 

B. If liquid has been spilled, or objects have fallen into the video product.

 

C. If the video product has been exposed to rain or water.

 

D. If the video product does not operate normally by following the operating instructions.

 

Adjust only those controls that are covered by the operating instructions. Improper

 

adjustment of other controls may result in damage and will often require extensive work by a

 

qualified technician to restore the video product to its normal operation.

 

E. If the video product has been dropped or the cabinet has been damaged.

 

F. When the video product exhibits a distinct change in performance-this indicates a need for

 

service.

19

Replacement Parts – When replacement parts are required, have the service technician verify

 

that the replacements used have the same safety characteristics as the original parts. Use of

 

replac ments specified by the video product manufacturer can prevent fire, electric shock, or

 

other hazards.

20

Safety Check – Upon completion of any service or repairs to this video product, ask the service

 

technician to perform safety checks recommended by the manufacturer to determine that the

SYMPTOM

POSSIBLE CAUSE

 

CORRECTIVE ACTION

 

 

 

 

Timer recording

The date and time are not correct.

-

Set the date and time correctly.

is not working.

The unit is not set to timer record-

-

Press the POWER/TIMER button to

 

 

ing stand-by mode.

 

display “ ” on the display panel.

 

“N” is selected for the TIMER

-

Be sure to select “Y” for the TIMER

 

PROGRAM SET.

 

PROGRAM SET.

 

 

 

 

Alarm recording

“NO” is selected for alarm recording

-

Be sure to select “YES” for alarm

is not working

in the ALARM REC SET menu.

 

recording.

 

 

 

 

Noise in the

The tracking adjustment is wrong.

-

Adjust it by using the manual

playback picture.

 

 

tracking.

 

 

-

Press the PLAY button in the play-

 

The video heads need cleaning.

 

back mode.

 

 

 

 

 

-

Clean the video heads.

 

 

 

 

The date and

“NO” is selected for the date and

-

Be sure to select “YES” for the

time are not

time in the DISPLAY SET menu.

 

display.

recorded.

The date and time go off the ON-

- Press the DISPLAY button to show

 

SCREEN by pressing the DISPLAY

 

 

the date and time.

 

button.

 

 

 

 

 

 

 

 

The cassette

Problem with the system or tape.

-

Unplug the power cord then plug it

tape cannot be

 

 

back in.

ejected

 

 

 

 

 

 

 

 

video product is in safe operating condition.

21

Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as recom-

 

mended by the manufacturer.

22

Heat – The product should be situated away from heat sources such as radiators, heat registers,

 

stoves, or other products (including amplifiers) that produce heat.

Note to CATV system installer

This reminder is provided to call the CATV system installer’s attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

✔

•Press the RESET button for more than 5 seconds to perform the reset. Running Time will not be reset.

Periodic Inspection and Maintenance

Periodic inspection and maintenance should be referred to your dealer. If there is noise in the playback picture, and it cannot be corrected using the tracking control, it may indicate that the video heads need cleaning. The video heads should be cleaned and inspected every 1,000 hours. The video heads usage can be checked using initial menu, running time.

System Down

If the unit does not function at all, try the following.

1Unplug the power cord then plug it back in.

2Reset the memory. (Press the RESET button. Under normal conditions, do not touch the RESET button)

3If the problem is not corrected after performing steps 1 and 2, consult your dealer.

iii

960-Hour Time Lapse Video Cassette Recorder

960-Hour Time Lapse Video Cassette Recorder

40

Page 3 Page 5
Image 4
Page 3 Page 5
Contents User’s Guide SG-7960Safety information InstallationSpecifications ConnectorsOther Specifications VideoService Periodic Inspection and MaintenanceUse System DownContents Locations of controls and indicators Inspection ProcedureDaily Inspection Front panelConnecting to a Multiview System for a Alarm Recording Digital DisplayConnecting to a Multiview System for Normal Recording SW Output Terminal Series Output TerminalSeries Input Terminal Back PanelRemote Control Alarm Input TerminalAlarm Output Terminal Panic Input TerminalSetting In/Out terminals Power Cord InstallationInsert the plug of the power cord into an outlet Checking Usage DurationChecking the Alarm Recording Times Checking Power Loss TimesData for the previous alarm recordings, past 35, is erased Types of On-screen Displays and Display SequenceSetting the Buzzer If the Timer button is pressed without inserting a cassetteSetting procedure is now complete Buzzer will be heard whenever a button is pressedSetting the SW Out Terminal Output Setting the Security Lock Set LockVideo Cassette Tapes Other Functions Setting the Clock Clock SettingTape Counter Zero Search Example To set the clock to April 12, 2000 atAlarm Scan Playback will start, and alarm scan is cancelledPlayback will start, and index search is cancelled Index SearchChanging the On-Screen Display Alarm SearchSelecting the On-screen Display Special Playback Picture SearchStill Image Vertical Lock ControlNormal Playback Normal Recording Normal PlaybackTracking Control Audio PlaybackAutorepeat Recording Program Timer RecordingAutorepeat Recording Programmed timer recording Example Recording will start in series recording modeCursor is moved to the N/Y position Series Recording Setup Panic Recording Series RecordingTo Cancel a Program Timer Recording Connecting to a Lorex Monitor for Alarm RecordingThat the cursor is located Alarm Recording Alarm Recording SettingAlarm Recording Counter Display Connecting to a Lorex Monitor for Normal Recording

SG-7960 specifications

The LOREX Technology SG-7960 is a high-performance security camera system designed to meet the demands of modern surveillance applications. With its advanced technology and robust features, the SG-7960 provides users with reliable monitoring capabilities for homes, businesses, and outdoor environments.

One of the standout features of the SG-7960 is its 4K Ultra HD resolution. This high-definition imaging capability offers four times the resolution of standard 1080p cameras, ensuring that every detail is captured with exceptional clarity. This is particularly beneficial for identifying faces, license plates, or any other critical details in the video footage.

The SG-7960 also incorporates smart motion detection technology. This feature allows the camera to differentiate between people, animals, and vehicles, reducing false alarms and ensuring that users receive alerts only when significant movement is detected. This intelligent analysis not only enhances security but also aids in monitoring specific areas more effectively.

In addition, the camera features night vision capabilities with infrared technology. The SG-7960 is able to capture clear images in complete darkness, thanks to its advanced infrared LEDs. This ensures round-the-clock surveillance, giving users peace of mind regardless of the time of day.

Another notable characteristic of the SG-7960 is its weatherproof design. Built to withstand harsh weather conditions, this camera is ideal for outdoor installations, providing reliable performance in rain, snow, and extreme temperatures. Its durable construction ensures longevity and consistent operation.

Interconnectivity is a key aspect of the SG-7960. The system is compatible with a range of smart home applications and can be controlled remotely via a user-friendly app. This allows users to view live feeds, receive alerts, and manage settings from their smartphones or tablets, making it easier than ever to stay connected to their surveillance system.

Overall, the LOREX Technology SG-7960 stands out as a powerful security camera that combines high-quality imaging, smart technology, and durable design. Whether for personal use or business security, this camera offers advanced features that enhance surveillance capabilities and provide peace of mind for users. With its comprehensive specification and user-friendly interface, the SG-7960 represents a solid investment in safety and security.
Top Page Image Contents