Battery Connections, TV Connections

Connections

Battery Connections

Charging the Battery

•Attach the supplied battery pack to the back of the portable DVD player.

•Plug the supplied AC adapter into a standard power outlet, and then connect it to the DC IN 12V jack on the left side of the player.

•Turn off the player. The battery pack will NOT charge while the portable DVD player is powered on.

•The red “Batt Chrg.” light will glow while the battery pack is charging and will turn green when fully charged. Allow several hours to charge the battery pack.

•When fully charged the battery will last ~2.5 hours.

Removing the Battery

•Press the PUSH button to remove the battery pack.

CAUTION

• Use speciﬁ ed charger only.

•May explode if battery is incorrectly replaced or disposed of in ﬁ re.

•Do not short circuit.

•Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

•Do not place the battery pack under direct sunlight or in excessively hot places (over 60°C (140°F)) such as the dashboard of cars.

•Only use with the speciﬁ c power adapter by manufacturer.

•The battery pack will not charge while the DVD player is turned on.

TV Connections

��

Standard AV Connections

•Connect the supplied audio/video cable (mini-plug to RCA) from the AV OUT jack to the Audio/Video Inputs on our television.

•Slide the AV OUT/AV IN switch to the AV OUT position.

S-Video/Progressive Scan Connections

For improved picture quality:

•Connect an S-Video cable with mini-plug adapter (not included) from the S-VIDEO/ P-SCAN jack to the S-Video input on your television.

•Connect a Component Video cable with mini-plug adapter (not included) from the S-VIDEO/P-SCAN jack to the Component Video input on your television.

•Slide the AV OUT/AV IN switch to the AV OUT position.

•Press the MODE button to switch between S-Video and Progressive Scan modes.