Go-Video DDV9485 manual Select Show Weak Channels, Set Show Weak Channels

Show Weak Channels

When you run Auto Channel Search, it will skip channels with weak signals, i.e. poor picture quality. With Show Weak Channels, you can add more channels to your list by lowering the cut-off point at which a picture is acceptable to view.

1 Open “Setup Menu”

Press and hold the Menu button for 3 seconds.

2 Select “Tuner & Channel List”

Press 3.

3 Select “Show Weak Channels”

Press the down arrow until Show Weak Channels is selected.

4 Set “Show Weak Channels”

Press the right arrow repeatedly to set Show Weak Channels to Yes or No.

SETUP MENU

1 ➔ Set Clock Menu

2 : Copy/Record Settings

3 : Tuner And Channel List

4 : Dual-Deck Features

5 : Reset Factory Settings

____________________________________

➔/ ➔ = Move ➔ = Sel MENU=Quit

TUNER AND CHANNEL LIST
	CH ##
➔ Tuner Band		Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels		No
Tuner Audio		Stereo
____________________________________
➔/➔ = Move	➔ = Sel	MENU=Quit
TUNER AND CHANNEL LIST
	CH ##
Tuner Band		Auto
Auto Channel Search
Add Channel
Remove Channel
➔ Show Weak Channels		No
Tuner Audio		Stereo
____________________________________
➔/➔ = Move	➔ = Sel	MENU=Quit
TUNER AND CHANNEL LIST
	CH ##
Tuner Band		Auto
Auto Channel Search
Add Channel
Remove Channel			No
➔ Show Weak Channels		No
			Yes
Tuner Audio		Stereo
____________________________________
➔/➔ = Move	➔ = Sel	MENU=Quit

TUNER AND CHANNEL LIST 33