– Playback –
Playback Features
Adjusting tracking condition
–Tracking Adjustment
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during playback, press SET
•Press SP/EP on the Remote again to reactivate automatic tracking.
Playing back tape repeatedly
–Auto Repeat Play
Recording
It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. Accidental erasure prevention
To prevent accidental recording on a recorded cassette, remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Record safety tab
Basic Recording
1Load a cassette
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.
• The VCR turns on, and the counter is reset, automatically.
2 Select recording channel
Press | CH 001 |
| |
the Remote |
|
• If you connect the TV and the VCR |
only using the RF connection, press |
TV/VCR on the Remote so that the |
1Access Menu screen
Press MENU on the Remote. Press SET
2Select ON/OFF
Press ENTER to select “ON” or “OFF”.
Press MENU to return to normal screen.
MENU |
|
|
CLOCK SET |
|
|
TIMER REC SET |
|
|
AUTO REPEAT | ON | OFF |
CH SET UP | ON | OFF |
SAP |
LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND
MENU |
|
|
CLOCK SET |
|
|
TIMER REC SET |
|
|
AUTO REPEAT | ON | OFF |
CH SET UP | ON | OFF |
SAP |
LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND
VCR mode indicator lights on the display panel, to view the |
program to be recorded. |
3Set tape speed Press SP/EP.
00 : 00 : 00 SP
4 Start recording
On the VCR, press REC. Or on theCH 110 Remote, while holding REC, press
3Start Auto Repeat Play Press PLAY. The tape will play over and over until the repeat mode is canceled.
PLAY ().
During recording
Pause recording
Press PAUSE.
• Press PAUSE to resume recording.
•You can select channel in the recording pause mode.
Stop recording
Press STOP ( ) on the | OR Press STOP/EJECT |
Remote. | (■/ ) on the VCR. |