JVC HR-VP70U Select Time Zone, Select D.S.T. Mode, SET DATE, Time and D.S.T, Make Corrections

MANUAL CLOCK SET

DATE 1/ 1/97 WED TIME – –:–– AM

D.S.T. ON

PRESS NUMBER KEY (O–9)

OR (5,°), THEN (OK)

PRESS (MENU) TO END

8	SELECT TIME ZONE
	You can select the zone			TIME ZONE SELECT
	automatically or manually
	▲▼					=AUTO
	by pressing CH		or
						MANUAL
	SHUTTLE PLUS		. If an
		%Þ
	incorrect time is displayed
	you may be receiving the
	clock setting data of a PBS
				PRESS (5,°) TO SELECT
	channel from an adjacent
				PRESS (MENU) TO END
	time zone or from an
	incorrect PBS channel from a cable TV system. If you
	selected "AUTO" in step 7 select "MANUAL" and select
	the correct time zone manually.
	● If you selected "AUTO", press MENU to return to the
	Semi-Auto Clock Set screen.
	● If you selected			TIME ZONE SELECT
	"MANUAL", press OK
					=ATLANTIC
	and the screen to the					EASTERN
	right appears. Move the					CENTRAL
	highlight bar (arrow) to					MOUNTAIN
						PACIFIC
	your choice by pressing					ALASKA
	CH▲▼ or SHUTTLE					HAWAII
	PLUS %Þ, then press			PRESS (5,°) TO SELECT
				PRESS (MENU) TO END
	MENU twice to return to
	the Semi-Auto Clock Set screen.
9	SELECT D.S.T. MODE
	You have three choices:
	a–Select “AUTO” and the					D.S.T. SELECT
	adjustment to your VCR’s
	clock will be made
						=AUTO
	according to the incoming					ON
	signal from the host					OFF
	channel.
	b–Select “ON” and the
	adjustment will be made			PRESS (5,°) TO SELECT
				PRESS (MENU) TO END
	based on the clock itself.
	c–Select “OFF” if Daylight Saving Time doesn’t apply to
	you.
	Move the highlight bar (arrow) to your choice by
	pressing CH5° or SHUTTLE PLUS %Þ, then press
	MENU and the Semi-Auto Clock Set screen reappears.

IMPORTANT

Turn the VCR off after performing the Semi-Auto Clock Set procedure. "Auto" will appear on the front display panel when the clock is being set. The current time will appear automatically when the clock is set.

EN11

Manual

SELECT MODE

5 At the Override Auto Clock Set screen (☞ pg. 10), move the highlight bar (arrow) to “MANUAL CLOCK SET” by pressing CH▲▼ or SHUTTLE PLUS %Þ, then press OK.

SET DATE, TIME AND D.S.T.

6 The Manual Clock Set

screen is displayed and the

month digit begins blinking. Press the

appropriate NUMBER keys to set the date and time (if only 1 digit, press "0" first). Press CH▲▼ or SHUTTLE PLUS %Þ to set AM/PM

and D.S.T. (Daylight Saving Time). Press OK after AM/ PM and D.S.T. settings.

Set D.S.T. to "ON" to set the D.S.T. according to the VCR's clock or to "OFF" if D.S.T. doesn't apply to you.

When you’re finished with this set-up procedure, press MENU to start the clock.

NOTES:

●CH▲▼ and SHUTTLE PLUS %Þ can be used to perform all operations. (In this case, press OK after each setting.)

●At the Manual Clock Set screen, the setting that can be set blinks. When setting of a highlighted item is completed, the highlight bar moves down by 1 line to the next item.

MAKE CORRECTIONS

7 To change any of the settings, press OK or SHUTTLE PLUS Þ%until the item you want to change blinks, then set as in step 6.

Auto

SELECT MODE

5 At the Override Auto Clock Set screen, move the highlight bar (arrow) to "AUTO CLOCK SET" by pressing CH▲▼ or SHUTTLE PLUS %Þ, then power off the VCR. Do not power it on again until the clock has been adjusted. The clock is automatically adjusted on the hour except at 11:00 PM, midnight, 1:00 AM and 2:00 AM. (The clock will be adjusted on the hour based on the time displayed on the VCR, not on the actual real time.)

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time. With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.