JVC HR-J255EE, HR-J458EE SET Video Channel, Exit Video Channel SET Mode, With AV Connection

Page 5

3

4

SET VIDEO CHANNEL

Set your TV to UHF channel 36.

●If the two vertical white bars appear clearly on the screen as shown in the illustration (☞ "TEST SIGNAL" on page 4), press OK and then go to step 4.

●If the two vertical white bars do not appear clearly, press OK and then TV PROG + or – to set the video recorder to a vacant channel between 28 and 60 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50 and check if the two vertical white bars appear clearly on the screen; if so, go to step 4. If not, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 28 and 60, consult your JVC dealer.

EXIT VIDEO CHANNEL SET MODE

Press to finish the setting.

EN5

With AV Connection

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

ACCESS VIDEO CHANNEL SET MODE

1 Hold down STOP/EJECT on the recorder until the display panel shows the following.

SET VIDEO CHANNEL

2 Press OK, then press TV PROG – until the display panel shows the following.

Now the video channel is set to off (– –).

EXIT VIDEO CHANNEL SET

MODE

3 Press to finish the setting.

To view picture signals from the video recorder, set your TV to its AV mode.

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened.

Installing/Removing the lithium battery

1Make sure that the power plug is connected to an AC outlet and turn off the VCR power.

2Open the battery cover while pressing the release tab as illustrated.

3Insert a lithium battery with the plus (+) side up and push it in.

●To remove the lithium battery, press the latch A down- ward using a pointed non-metallic object, then pull out the lithium battery.

4Close the battery cover until it clicks in place.

A

Page 4 Page 6
Image 5
Page 4 Page 6
Contents HR-J458EE HR-J258EE HR-J255EE Auto Head Cleaner Safety PrecautionsHR-J458EE HR-J258/255EEBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsVideo Channel Set Access Video Channel SET ModeSelect TV System EN I Nitial Sett IngsPress to finish the setting Exit Video Channel SET ModeSET Video Channel With AV ConnectionSET Date Auto Set UpSET Time Start Auto Channel SET During Auto Set UpMajor Countries TV System Press OK or Push JOG ÞENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Turn on the RecorderClock Set Select LanguageOK or Push Jogþ Press Push JOG %Þto place the pointer next toLoad a Cassette Basic PlaybackPoint Start PlaybackSearch Playback FeaturesPlayback Activate HIGH-SPEED SearchOverride Automatic Tracking Adjust Tracking ManuallyReturn to Automatic Tracking Activate Repeat PlaybackSkip Over Unwanted Activate Index SearchSections Activate Instant ReviewBasic Recording Recording Features Return to Normal Screen S.T. Picture SystemEN Recording PreparationOr press Record on the recorder RecordingPlayback Start Time Express Timer ProgrammingEnter Programme Stop Time Enter Programme DateEngage RECORDER’S Timer ModeAccess Program Disengage Timer ModeAccess Program Screen Cancel or Replace a ProgrammeAuto SP→LP Timer HR-J458EE only Access Main Menu ScreenAuto Timer Return to Normal ScreenEdit To Another Video Recorder Remote A/B Code SwitchingEditing TV ReceiverMake Connections Edit From a Camcorder Or Another Video RecorderSET RECORDER’S Input Start Source PlayerOff-Air Recording Setting Of The Colour System Select ButtonsRecorded tape Your recorder Tape-To-Tape EditingPlayback equipment Dubbed tapeSelect Auto CH SET Access Tuner SETMode Tuner SETSelect Position Access Channel ListSET Desired Station Manual Channel SetEN Tuner SET Access Channel ListDelete a Channel Swap Channel PositionsFINE-TUNE Fine-Tuning ChannelsControl Your TV Using Additional Buttons TV Multi-brand Remote ControlSET TV Brand Code Operate TVPlayback Recording Questions and Answer S E NTry manual tracking. pg If you’re using the RF OUT connec- tionPress Play to turn the indicator off Check the cassette Recording Timer againNew one. pg OubleshootingFront View IndexDisplay Panel EN IndexRemote Control Maximum recording time Supplied fresh battery actualLP J458EE only EP J458EE onlyMemo HR-J458/258/255EE

HR-J255EE, HR-J258EE, HR-J458EE specifications

The JVC HR-J458EE, HR-J258EE, and HR-J255EE are part of JVC's renowned line of VHS VCRs, known for their reliability and performance, even in the era when digital formats have taken precedence. Each model offers unique features while sharing several advancements that reflect JVC's commitment to quality and user-friendly technology.

The HR-J458EE model represents the upper tier among the three, boasting a range of features designed for both casual and serious videophiles. One of its standout characteristics is the built-in Dolby Pro Logic Decoder, which enhances the audio experience significantly. This model also features a sleek design and a user-friendly interface. Its long-play (LP) function allows users to record for extended periods, making it ideal for recording movies and television shows. The HR-J458EE is equipped with an advanced digital tuner, ensuring excellent reception and clarity for a broader range of channels.

The JVC HR-J258EE serves as a middle-range option, offering versatility without compromising core functionalities. This model provides a solid balance of features, including the capability to view and record in SP (Standard Play) and LP mode. Users appreciate the easy setup process and the intuitive remote control that simplifies navigation. The HR-J258EE allows for high-quality playback and recording, thanks to its contribution to JVC’s proprietary technologies such as TBC (Time Base Correction), which minimizes the distortion and enhances the overall image quality of recorded tapes.

At the entry-level, the JVC HR-J255EE still delivers impressive capabilities, making it suitable for users looking for reliable performance without advanced features. It supports the standard VHS recording and playback formats alongside standard VHS resolution. The model's strengths lie in its straightforward operation — perfect for users who desire a no-frills device. The HR-J255EE has the convenience of one-touch recording and easy timer programming to maximize recording opportunities while remaining user-friendly.

Overall, the JVC HR series represents a solid lineup of VHS VCRs, with the HR-J458EE, HR-J258EE, and HR-J255EE catering to varying consumer needs. Each model retains JVC's hallmark of quality engineering, ensuring enjoyable viewing experiences for users, whether they're archiving favorite television shows, reliving cherished home videos, or enjoying classic films. These VCRs serve as an excellent reminder of an era characterized by analog technology, marrying quality and functionality seamlessly.
Top Page Image Contents