JVC HR-J655EA specifications Corrective Action, Timer again

Page 41

 

 

 

 

 

 

 

 

 

 

 

E

 

N

 

41

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RECORDING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYMPTOM

 

POSSIBLE CAUSE

 

CORRECTIVE ACTION

 

 

1.

Recording cannot be started.

● There is no cassette loaded, or the

Insert a cassette, or using adhesive

 

 

 

 

 

 

 

cassette loaded has had its Record

tape, reseal the slot where the tab

 

 

 

 

 

 

 

Safety tab removed.

was removed.

 

 

 

 

 

 

 

 

 

2.

TV broadcasts cannot be recorded.

● “L-1” or “F-1” has been selected as

Set to the desired channel.

 

 

 

 

 

 

 

the input mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

Tape-to-tape editing is not possible.

● The source (another video recorder,

Confirm that the source is properly

 

 

 

 

 

 

 

camcorder) has not been properly

connected.

 

 

 

 

 

 

 

connected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

● All necessary power switches have

Confirm that all units’ power switches

 

 

 

 

 

 

 

not been turned on.

are turned on.

 

 

 

 

 

 

 

● The input mode is not correct.

Set the input mode to “L-1” or “F-1”.

 

 

 

 

 

 

 

 

 

4.

Camcorder recording is not

● The camcorder has not been

Confirm that the camcorder is

 

 

 

possible.

properly connected.

properly connected.

 

 

 

 

 

 

 

● The input mode is not correct.

Set the input mode to “L-1” or “F-1”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TIMER RECORDING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYMPTOM

 

POSSIBLE CAUSE

 

CORRECTIVE ACTION

 

 

1.

Timer recording won’t work.

● The clock and/or the timer have

Re-perform the clock and/or timer

 

 

 

 

 

 

 

been set incorrectly.

settings.

 

 

 

 

 

 

 

● The timer is not engaged.

Press TIMER and confirm that “ä“ is

 

 

 

 

 

 

 

 

 

 

displayed on the display panel.

 

 

 

 

 

 

 

 

2.

On-screen timer programming is

● Timer recording is in progress.

Timer programming can’t be

 

 

 

not possible.

 

 

 

performed while a timer recording is

 

 

 

 

 

 

 

 

 

 

in progress. Wait until it finishes.

 

 

 

 

 

 

 

 

3.

“ä“ and “]“ on the display

● The timer is engaged but there’s no

Load a cassette with the Record

 

 

 

panel won’t stop blinking.

cassette loaded.

Safety tab intact, or cover the hole

 

 

 

 

 

 

 

 

 

 

using adhesive tape.

 

 

 

 

 

 

 

 

4.

The cassette is automatically

● The loaded cassette has had its

Remove the cassette and cover the

 

 

 

ejected, and “ä“ and “]“ on the

Record Safety tab removed.

hole with adhesive tape, or insert a

 

 

 

display panel won’t stop blinking.

 

 

 

cassette with the Record Safety tab

 

 

 

 

 

 

 

 

 

 

intact.

 

 

 

 

 

 

 

 

5.

“ä“ blinks for 10 seconds and the

● TIMER has been pressed when there

Check the programmed data and re-

 

 

 

Timer mode is disengaged.

are no programs in memory, or the

program as necessary, then press

 

 

 

 

 

 

 

timer record information has been

TIMER again.

 

 

 

 

 

 

 

programmed incorrectly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.

The cassette is automatically

● The end of the tape was reached

The programme may not have been

 

 

 

ejected, the power shuts off and

during timer recording.

recorded in its entirety. Next time

 

 

 

“ä“ and “]“ won’t stop

 

 

 

make sure you have enough time on

 

 

 

blinking.

 

 

 

the tape to record the entire

 

 

 

 

 

 

 

 

 

 

programme.

 

 

 

 

 

 

 

 

7.

G-CODEdoes not timer-record

● The recorder’s channel positions

Refer to "G-CODESetup" and re-

 

 

 

properly.

have been set incorrectly.

perform the procedure (☞ pg. 18).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 40 Page 42
Image 41
Page 40 Page 42
Contents HR-J655EA Safety First Safety PrecautionsAbout Head Cleaning Moisture CondensationBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsVideo Channel Set Access Video Channel SET ModeSelect TV System EN I Nitial Sett IngsFinish Video Channel SET SET Video ChannelFinish Video Channel SETEN Initial Settings Auto Set UpSET Time SET DatePress OK or Push JOG % During Auto Set UpStart Auto Channel SET Access Initial SET Screen Access Main Menu ScreenAccess Clock SET Screen Clock SetENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Turn on the RecorderLoad a Cassette Basic PlaybackPoint Start PlaybackSearch Playback FeaturesPlayback Activate SLOW-MOTION PlaybackOverride Automatic Tracking Adjust Tracking ManuallyReturn to Automatic Tracking Activate Repeat PlaybackSkip Over Unwanted Activate Index SearchSections Activate Instant ReviewUSE Soundtrack SelectionTrack Basic Recording Reset Counter Recording FeaturesEngage ITR Mode Select Channel to WatchMake Connections Engage Simulcast ModeChoose FM Broadcast Select TV ProgrammeReturn to Normal Screen S.T. Picture SystemPreparation JogþPlayback RecordingOr press Record on the recorder During B.E.S.TAccess Initial SET Screen CODESetupAccess G-CODE SET-UP EN Timer RecordingReturn to Normal Screen Enter Receiving Channel Position NumberPress Push JOG %Þor Number keys to input Number of the recordersAccess G-CODE Screen CODETimer ProgrammingAccess G-CODE Enter G-CODE NumberEngage RECORDER’S Timer ModeEnter Programme Stop Time Express Timer ProgrammingEnter Programme Date Enter Channel PositionScreen for about 5 seconds, then normal screen Or OK. Program Completed appears onAppears Repeat steps 1- 8 for each additional programmeAccess Program Disengage Timer ModeCancel or Replace a Programme Return to Timer ModeAuto Timer Auto SP→LP TimerRemove Power Supply Remote Control FunctionsSET Remote Control Code RE-SUPPLY PowerSET TV Brand Code TV Multi-brand Remote ControlOperate TV With televisions under Code 01, 02, 03, 05, 07, 15, 16 orHR-J655EA Setting Of The Colour System Select ButtonsOff-Air Recording Dubbed tape Tape-To-Tape EditingPlayback equipment Edit To Or From Another Video Recorder Input ModeStart Source Player EditingEdit From a Camcorder SET RECORDER’S Input ModeStart Camcorder Start RecorderAudio Dubbing Access Tuner SET Access Main MenuSelect Auto CH SET Tuner SETSelect Position Access Channel ListSET Desired Station EN Tuner SETDelete a Channel Access Tuner SET ScreenAccess Channel List Fine-Tuning Channels Perform TuningStore NEW Positions FINE-TUNEPlayback Recording Questions and Answer S E NMains power cord is discon- nected EN TroubleshootingIf you’re using the RF OUT connec- tion Press Play to turn the indicator off Check the cassetteCorrective Action Timer againNew one. pg OubleshootingFront View IndexDisplay Panel EN IndexRemote Control Accessories TUNER/TIMERGeneral VIDEO/AUDIOMemo HR-J655EA

HR-J655EA specifications

The JVC HR-J655EA is a standout model in the realm of VHS players and recorders, showcasing a blend of cutting-edge technology and practical features that cater to both casual viewers and avid collectors of video media. Launched as a part of JVC's renowned lineup of VHS products, the HR-J655EA maintains a reputation for reliability and performance.

One of the primary features of the JVC HR-J655EA is its superior image quality, aided by the integration of JVC's advanced 4-head video technology. This technology allows for improved playback and recording, providing users with clear and vibrant images. The machine is equipped to support various tape speeds, including SP and LP, offering the flexibility to choose between standard quality and extended recording time, which is particularly advantageous for capturing longer television programming or events.

The HR-J655EA also incorporates a built-in timer that enables users to schedule recordings with ease. This feature is especially useful for those who wish to record their favorite shows while they are away from home. Furthermore, the unit supports various playback formats, ensuring compatibility with a wide range of VHS tapes, including S-VHS for those who seek even higher quality recordings.

One of the key characteristics of the JVC HR-J655EA is its user-friendly interface. The machine is designed with straightforward controls that make navigation simple, and the remote control provides added convenience for adjusting settings from across the room. The on-screen programming guide enhances usability, allowing viewers to browse and schedule recordings without hassle.

In terms of connectivity, the unit boasts multiple input and output options, including AV and RF connections, making it easy to connect to televisions and other multimedia devices. This versatility ensures that users can integrate the HR-J655EA into their existing home entertainment setups with minimal effort.

Moreover, JVC has included features such as Auto Tracking, which optimizes playback by automatically adjusting the tape position for the best possible image quality. The machine's robust build quality further adds to its longevity, making it a reliable choice for VHS enthusiasts.

In summary, the JVC HR-J655EA combines classic VHS technology with modern functionality, making it an invaluable device for anyone looking to relive the nostalgia of a bygone era of home entertainment. Its blend of high-quality video playback, user-friendly features, and reliable build makes it a cherished asset for video collectors and casual viewers alike.
Top Page Image Contents