Other Functions, Changing display information

Other Functions

Changing display information

Each time you press DISPLAY, the display panel shows the time counter and the clock time alternatively.

• When DISPLAY on the Remote is pressed, time counter will appear on the TV screen.

To reset the time counter, press C. RESET on the Remote.

BLUE BACK — ON/OFF

When this function is set to “ON”, the TV screen becomes all blue in the following case:

SEPARATE AUDIO PROGRAM (SAP)

Your VCR is fitted with an SAP broadcast system which enables you to switch to a SEPARATE AUDIO PROGRAM when viewing a selected channel.

This function applies only when the program is broadcast in multi-languages through the SAP broadcast system.

When a TV is connected with an audio/video cable, turn the TV and this VCR on, and select the video input mode the TV.

When receiving a channel not in use.

1Press MENU on the remote. Press SET –/+ to select

“NO NOISE BACKGROUND”.

2Press ENTER to select “ON”.

3Press MENU to return to normal screen.

STEREO RECORDING AND PLAYBACK

RECORDING STEREO BROADCASTS

The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts.

Press MENU on the Remote. Press SET –/+ to select “SAP” option.

Press ENTER to select “ON” position.

Press MENU to return to normal screen.

MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT	ON	OFF
CH SET UP	ON	OFF
SAP	ON	OFF

LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND

〈+/–/ENTER/MENU〉ONOFF

MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT	ON	OFF
CH SET UP	ON	OFF
SAP	ON	OFF

LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND

〈+/–/ENTER/MENU〉ONOFF

When a MTS STEREO broadcast is STEREO received, the STEREO will appear on

the screen and the program can be viewed or recorded in stereo.

The Hi-Fi STEREO recording proce- dure is the same as for normal recordings.

NOTE: When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case the word "STEREO" will not appear and the sound will be in mono.

OUTPUT SELECTION

When viewing an MTS STEREO TV program, or playing a prerecorded VHS Hi-Fi STEREO videotape, press A.MONITOR to select how the audio will be heard through the speakers. Normally set to the Hi-Fi STEREO position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The "R" and "L" positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below.

OUTPUT	SOUND HEARD ON BOTH
SELECTION	SPEAKERS

STEREO	STEREO
L ch	LEFT CHANNEL AUDIO
R ch	RIGHT CHANNEL AUDIO
MONO	MONO

NOTES: • When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural.

•When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/ Video cord not connected), the sound will be monaural.

LISTENING TO SAP

When the VCR is turned on or a channel selection is made, make certain "SAP" appears on the screen.

This means that the "Separate Audio Program" broadcast- ing is available.

STEREO SAP

SAP

JVC TV Remote Control

This Remote can control some functions (TV POWER, INPUT, TV CH –/+ and TV VOL –/+) of a remote controllable JVC TV without setting.

NOTE:

•It’s not possible to operate a unit not equipped with a remote sensor.

•This Remote can control a JVC TV only.