Video Channel Set
Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the recorder through the RF cable.
Perform the following steps only if —
—Video Chennel Set has not been done correctly by the Auto Set Up function ( 4),
—you set up the recorder’s tuner by Preset Download ( 4) instead of using the Auto Set Up function,
—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area,
—you change the connection between your recorder and TV from RF connection to AV connection, or vice versa.
If you have connected the recorder to your TV via the AV connection, set the video channel to off.
If you have connected the recorder to your TV via the RF connection, set the correct video channel.
● Make sure the recorder’s power is off and there is no cassette inserted in the recorder.
A Access Video Channel Set mode
Hold down 0 on the recorder until the display panel shows the following.
B Set RF output system
The blinking number on the display indicates the RF output system of your
country. Press rt to set to “1” or “2”, then press OK. (1: B/G
2: D/K)
Major Countries | TV System | |
|
| |
Austria, Denmark, Finland, Holland, Italy, |
| |
Norway, Spain, Switzerland, Sweden, | B/G | |
Germany, Egypt |
| |
|
| |
China, Mongolia, Rumania, Bulgaria, Czech | D/K | |
Rep., Slovakia, Hungary, Poland, Russia | ||
| ||
|
|
C Set video channel
With AV connection
Press PR – until the display panel shows “1 –
● Now the video channel is set to off.
With RF connection
Press PR + or – to set the video channel to a vacant position between 22 and 69 which is not occupied by any local station in your area.
(Example) If channel 50 is available in your area, set the video channel to 50.
Then, set your TV to UHF channel 50.
●If the two vertical white bars appear
clearly on the screen as shown on the right, go to step 4.
●If the two vertical white bars do not appear clearly,
DExit Video Channel Set mode
Press OK.
With AV connection
To view picture signals from the recorder, set your TV to its AV mode.
With RF connection
The channel on which the two vertical white bars appear clearly is your video channel. To view picture signals from the recorder, set your TV to the video channel.
Specifications
GENERAL
Power requirement | : AC 220 V – 240 Vd, 50 Hz/60 Hz | |
Power consumption |
|
|
Power on | : | 15 W |
Power off | : | 3.3 W |
Temperature |
|
|
Operating | : | 5°C to 40°C |
Storage | : | |
Operating position | : | Horizontal only |
Dimensions (W x H x D) : | 400 mm x 94 mm x 270 mm | |
Weight | : | 3.1 kg |
Format | : | VHS PAL standard |
Maximum recording time |
|
|
(SP) | : | 240 min. with |
(LP) | : | 480 min. with |
VIDEO/AUDIO
Signal system | : | |
|
| monochrome signal, 625 lines |
|
| 50 fields |
Recording system | : DA4 (Double Azimuth) head helical | |
|
| scan system |
: | 45 dB | |
Horizontal resolution | : | 250 lines |
Frequency range |
|
|
Normal audio | : 70 Hz to 10,000 Hz | |
: 20 Hz to 20,000 Hz | ||
Input/Output | : | |
|
| IN/OUT x 1, IN/DECODER x 1 |
|
| RCA connectors: |
|
| VIDEO IN x 1, AUDIO IN x 1, |
|
| AUDIO OUT x 1 |
TUNER/TIMER
TV channel storage | : | 99 positions (+AUX position) |
capacity |
|
|
Tuning system | : | Frequency synthesized tuner |
Channel coverage |
|
|
VHF | : 47 MHz – 89 MHz/ | |
|
| 104 MHz – 300 MHz/ |
|
| 302 MHz – 470 MHz |
UHF | : 470 MHz – 862 MHz | |
Aerial output | : UHF channels 22 – 69 (Adjustable) | |
Memory backup time | : | Approx. 10 min. |
ACCESSORIES
Provided accessories | : | RF cable, |
|
| Infrared remote control unit, |
|
| “R6” battery x 2 |
Optional accessories | : | Satellite Controller |
Specifications shown are for SP mode unless specified otherwise. E. & O.E. Design and specifications subject to change without notice.
— 16 —