JVC HR-J658EE Remote Control Functions, Remove Power Supply, SET Remote Control Code

Page 22

22ENSPECIALFEATURES

Remote

Control

Functions

VCR

NUMBER "1"	1		2	3
NUMBER "1"
	4		5	6
	7	"2"	8	9
	NUMBER		0
			0

1

STOP

3

2

4

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

REMOVE POWER SUPPLY

1 Unplug the mains power cord from the mains outlet.

SET REMOTE CONTROL CODE

2 While holding down VCR on the remote control, press the NUMBER key "2" and then press STOP.

RE-SUPPLY POWER

3 Plug the mains power cord back into the mains outlet.

TURN THE RECORDER ON

4 Press on the remote control. The recorder will now only respond to B code signals.

NOTE:

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.

Image 22

Contents HR-J658EE Auto Head Cleaner Safety PrecautionsDo not place the recorder Situate Recorder Check ContentsBasic Connections Connect Recorder to MainsSelect TV System Access Video Channel SET ModeVideo Channel Set EN I Nitial Sett IngsFinish Video Channel SET Video ChannelFinish Video Channel SET SETSET Time Auto Set UpSelect Language SET DateMajor Countries TV System During Auto Set UpStart Auto Channel SET Press OK or Push JOG ÞOn-Screen Displays Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display Turn on the RecorderPlace the pointer next to Select LanguageClock Set Initial SET, then pressPoint Basic PlaybackLoad a Cassette Start PlaybackPlayback Playback FeaturesSearch Activate HIGH-SPEED SearchReturn to Automatic Tracking Adjust Tracking ManuallyOverride Automatic Tracking Skip Over UnwantedActivate Index Search Activate Instant ReviewBasic Recording Recording Features Load a Cassette Access Main Menu ScreenS.T. Picture System Return to Normal ScreenPlayback RecordingOr press Record on the recorder Enter Programme Stop Time Express Timer ProgrammingStart Time Enter Programme DateTimer Mode Engage RECORDER’SCancel or Replace a Programme Disengage Timer ModeAccess Program Return to Timer ModeAuto SP→LP Timer Auto TimerSET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY PowerOperate TV TV Multi-brand Remote ControlSET TV Brand Code With televisions under Code 01, 02, 03, 05, 07, 15 orMake Connections Input ModeEdit To Or From Another Video Recorder Start Source PlayerStart Camcorder SET RECORDER’S Input ModeEdit From a Camcorder Start RecorderSetting Of The Colour System Select Buttons Off-Air RecordingPlayback equipment Tape-To-Tape EditingRecorded tape Your recorder Dubbed tapeMode Access Tuner SET ScreenSelect Auto CH SET Select TV SystemSelect Position Access Tuner SETAccess Channel List SET Desired StationDelete a Channel Access Channel ListEN Tuner SET Swap Channel PositionsFine-Tuning Channels FINE-TUNEIf you’re using the RF OUT connec- tion EN TroubleshootingMains power cord is discon- nected Press Play to turn the indicator off Check the cassetteTimer again RecordingOubleshooting New one. pgQuestions and Answer S E N Playback RecordingIndex Front ViewDisplay Panel Remote Control Supplied fresh battery actual Specification SMaximum recording time HR-J658EE