JVC HR-J73MS manual S.T. Picture System, Recording, Playback

Page 11

B.E.S.T. Picture System

The B.E.S.T. (Biconditional Equalized Signal Tracking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. The default setting for both recording and playback is “ON”.

Recording

1 Insert a cassette with the record safety tab intact.

LThe recorder power comes on automatically.

2 Press OSD button and the language screen appears. (To change the language, ☞ p.8) Press OK button.

3

The default setting is “ON”.

O.S.D.

 

: ON

L

If this is the case, go to step 4. If not,

B.E.S.T.

 

: ON

 

 

 

 

press TV PROG. 8/9 button to

 

 

 

 

place the pointer next to “B.E.S.T.”,

[TV PROG ]

 

OK : ON/OFF

 

then press OK button to set to “ON”.

[OSD] : EXIT

 

 

 

 

 

 

4

Press OSD

 

 

 

button to close mode select screen.

 

 

 

5 Press and hold Record ¦button and Play - button on the remote, or press Record ¦button on the recorder.

LThe recorder spends approximately

7 seconds assessing the condition of the tape, then begins recording.

L When the “B.E.S.T.” indicator begins B.E.S.T. blinking, that means adjustment is

complete.

Notes:

∙The B.E.S.T. system works for SP, LP (or EP) modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.

∙In the case of timer recording, the B.E.S.T. system works before recording is initiated.

∙Once the cassette is ejected, the B.E.S.T. data is cancelled. The next time the cassette is used for recording, B.E.S.T. is re-performed.

ATTENTION:

Since the B.E.S.T. system works before recording actually starts, there is a delay of approximately 7 seconds after Record ¦and Play - buttons on the remote are pressed, or Record ¦ button on the recorder is pressed. To make sure you record the desired scene or programme in its entirety, first perform the following steps:

1Press and hold Pause/Still 8 and Record ¦ buttons to engage the Record Pause mode.

∙The recorder then automatically check the condition of the tape and, after approximately 7 seconds, re- enters Record Pause.

2Press Play - button to start recording.

∙If you want to bypass the B.E.S.T. system and begin recording immediately, set “B.E.S.T.” to “OFF” in step 3 above.

Playback

The recorder assesses the quality of the tape once you initiate playback.

When watching a tape recorded with “B.E.S.T.” set to “ON”, it is recommended that you leave B.E.S.T. on during playback as well.

1 Press Play - button to start playback.

LThe recorder adjusts the playback picture quality based on the quality of

the tape in use.

L B.E.S.T. is active during Auto B.E.S.T. Tracking. “B.E.S.T.” appears blinking

on the screen.

Notes:

∙When watching a rental tape, or one recorded on another video recorder, set B.E.S.T. to your preference by performing steps 2 through 4.

∙“B.E.S.T.” only appears at the beginning of automatic tracking. Even though it doesn’t appear after that, the B.E.S.T. function is operative.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents HR-J73MS Table of Contents Precautions Importants PrecautionsSpecial note on head cleaning Auto Head CleanerFront panel Controls, Indicators and TerminalsRear panel Controls, Indicators and Terminals cont’dDisplay panel TV Operation Wireless remote controlInstalling Batteries How to UseConnection B InstallationsMajor countries Colour TV broadcast Switch System Position Connection a basicOn-Screen Displays Setting the On-screenInstallations cont’d Setting the video channelPower failure indicator Setting the Clock Setting the TunerVideo Cassette Setting the Tuner cont’dPlayback S.T. Picture SystemRecording Manual tracking PlaybackBasic operations Playback cont’d Record button Instant timer recording off timerRecording To watch another programme while recordingUsable cassettes and their recording times Press C.RESET button before starting recording or playbackRecording cont’d Elapsed recording time indicationTimer Recording Timer Programming screen Timer Recording cont’dCheck And Cancel Programmes Auto SP/LP TimerTape Monitor Connecting to Hi-Fi stereo systemKaraoke Hi-Fi audio connectionProvided in the correct directions Karaoke cont’dMicrophone Operation Wireless MIC ANTPreparation PreparationPress Play button Start singing Wireless MIC buttonKEY Control button Wireless MIC indicator MIC1, 2 terminalsEcho control Volume adjustmentKey control Index Search makes finding songs easier. p.13 Direct access song search blank searchSinging and recording SAR Editing from a camcorder EditingEditing to/from another recorder Off-air recording Setting of the colour system select buttonsInformation on Multi-System Compatibility Dubbed tape Information on Multi-System Compatibility cont’dTape-to-tape editing Recorded tape Playback equipmentSymptoms Check point TroubleshootingUHF SpecificationsTroubleshooting cont’d HyperHR-J73MS

HR-J73MS specifications

The JVC HR-J73MS is a notable addition to JVC's line of VHS players and recorders that gained popularity in the 1990s. This model captures the essence of the VHS home entertainment experience, offering a blend of functionality, user-friendly features, and solid performance.

One of the main features of the HR-J73MS is its capability to play and record in 4-head Hi-Fi stereo. This technology ensures superior audio quality, allowing users to enjoy their favorite shows and movies with rich sound. With its 19-micron head, the JVC HR-J73MS provides enhanced picture clarity and reduces the likelihood of tape wear, which was often a concern with VHS tapes.

The HR-J73MS comes equipped with various recording modes. The standard SP mode allows for the highest quality recording but occupies more tape space, while the LP mode effectively doubles the tape duration with a slight decrease in quality. This versatility in recording options offers users the flexibility to choose based on their needs, whether for long recordings like family events or high-quality playback for special movies.

Another standout feature is the built-in timer for programmable recording. Users can easily schedule their recordings, making it convenient to capture shows airing at inconvenient hours. The VCR's on-screen display simplifies navigation, allowing users to access settings, programming, and playback options with ease.

The design of the JVC HR-J73MS also reflects the era's aesthetics, featuring a sleek, compact body that fits seamlessly into any home entertainment setup. The front panel is equipped with straightforward controls and a digital clock, enhancing the unit's user-friendliness. Additionally, the VCR includes a variety of input and output options, including standard composite video, ensuring compatibility with various TV models and video devices.

In summary, the JVC HR-J73MS is a well-rounded VHS player and recorder that exemplifies the capabilities of its time. With features such as 4-head Hi-Fi stereo sound, multiple recording modes, programmable timer functionality, and an intuitive design, it remains a beloved choice for those who appreciate the analog charm of VHS tapes. Whether for nostalgia or practical use, the HR-J73MS encapsulates the spirit of home video entertainment in a compact and efficient package.
Top Page Image Contents