– Playback –
Automatic operations after rewinding
—Next Function Memory
The Next Function Memory “tells” the VCR what to do after rewinding is complete. Ensure that the VCR is in stop mode.
●For Automatic Playback Start
Press REW (3), then press PLAY (4) within 2 seconds.
●For Automatic Power Off
Press REW (3), then press POWER 1 within 2 seconds.
●For Automatic Timer Standby
Press REW (3), then press TIMER within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer Standby function if the cassette’s record safety tab is removed.
Playing back tape repeatedly (100 times)
—Repeat Play
During playback, press and hold PLAY (4) for more than
5 seconds. The play indicator ($) on the display panel starts blinking slowly. To stop playback, press STOP (8) on the Remote or STOP/EJECT (0) on the VCR.
NOTE:
Pressing PLAY (4), REW (3), FF (5) or PAUSE (9) also cancels repeat playback.
Locating beginning of recordings
—Index Search
Index codes are placed on the tape at the beginning of each recording when recording on this VCR.
AWhile the tape is not running, press wor e(2or 6) on the Remote to start search.
BTo access a recording of 2 to 9 index codes away, press wor e(2or 6) repeatedly until the correct number is displayed on the screen
| (only if “SUPERIMPOSE” is set to |
|
|
| INDEX 1 | |||||||||||
| “ON”)( pg. 14). Playback begins |
|
|
|
| |||||||||||
| automatically when the desired |
|
|
|
| |||||||||||
| recording is located. |
|
|
|
|
|
|
|
| |||||||
| Beginning of the |
| Current | Beginning of the | ||||||||||||
|
| current program |
|
|
| position on | 2nd next program | |||||||||
|
| recorded |
|
| the tape | recorded | ||||||||||
|
| Previous |
|
|
|
|
|
| Next | 2nd | next | |||||
|
|
|
|
|
|
|
| |||||||||
|
| program |
|
|
|
|
| program | ||||||||
|
| recorded |
|
|
|
|
| recorded |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Locating beginning of timer recordings
—Instant Review
After ensuring that the VCR is turned off and that the timer mode is disengaged, press REVIEW on the Remote.
●The VCR turns on, and rewinds to the index code indicating the beginning of the last
●You can access a program of 2 to 9 index codes away from the current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press REVIEW three times.
●The Instant Review function will also operate if the VCR is turned on.
Skipping unwanted portions
—Skip Search
Press SKIP SEARCH on the Remote once to 4 times during playback. Each press initiates a
— 9 —