Tuner Setting, Tape-To-Tape Editing | JVC HR-J791AM, HR-J797AM

– Information on Multi-System Compatibility –

Tape-To-Tape Editing

There are 4 different types of recorded tape, depending on the signal recorded.

Recorded tape	Playback equipment	HR-J797AM/HR-J791AM	Dubbed tape
		Recording circuit

Tuner Setting

IMPORTANT

Perform the following steps only if auto channel set has not been set correctly by Auto Set Up function or if you have moved to a different area or if a new station starts broadcasting in your area.

Your recorder needs to memorise all necessary stations in channel positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area so that you can call them up with the PR+/– buttons without going through any vacant channels.

Auto Channel Set

IMPORTANT

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Channel Set, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. Refer to “TV System Selection — When you see the picture but the audio can’t be heard or sounds unnatural”.

●Since your recorder memorises all detected stations even if the reception condition is poor, some of those stored stations may produce a noisy picture. To delete those stations, refer to “Delete A Channel”.