JVC HR-S5950EU specifications Recording

Page 51

 

 

 

EN 51

RECORDING

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Recording cannot be started.

● There is no cassette loaded, or the

Insert a cassette, or using adhesive tape,

 

 

cassette loaded has had its record safety

cover the hole where the tab was

 

 

tab removed.

removed.

 

 

 

 

2.

TV broadcasts cannot be recorded.

● “L-1”, “L-2”, “F-1” or “SAT” has been

Set to the desired channel.

 

 

selected as the input mode.

 

 

 

 

 

3.

Tape-to-tape editing is not possible.

● The source (another video recorder,

Confirm that the source is properly

 

 

camcorder) has not been properly

connected.

 

 

connected.

 

 

 

● All necessary power switches have not

Confirm that all units’ power switches are

 

 

been turned on.

turned on.

 

 

● The input mode is not correct.

Set the input mode to “L-1”, “L-2” or

 

 

 

“F-1”.

 

 

 

 

4.

Camcorder recording is not possible.

● The camcorder has not been properly

Confirm that the camcorder is properly

 

 

connected.

connected.

 

 

● The input mode is not correct.

Set the input mode to “L-1”, “L-2” or

 

 

 

“F-1”.

 

 

 

 

5.

“” and “$“ on the front display

● The end of the tape was reached during

The programme may not have been

 

panel won’t stop blinking.

recording.

recorded in its entirety. Next time make

 

 

 

sure you have enough time on the tape to

 

 

 

record the entire programme.

 

 

 

TIMER RECORDING

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Timer recording won’t work.

● The clock and/or the timer have been set

Re-perform the clock and/or timer

 

 

incorrectly.

settings.

 

 

● The timer is not engaged.

Press # and confirm that “#” is displayed

 

 

 

on the front display panel.

 

 

 

 

2.

Timer programming is not possible.

● Timer recording is in progress.

Timer programming can’t be performed

 

 

 

while a timer recording is in progress.

 

 

 

Wait until it finishes.

 

 

 

 

3.

“#” on the front display panel won’t

● The timer is engaged but there’s no

Load a cassette with the record safety tab

 

stop blinking.

cassette loaded.

intact.

 

 

 

 

4.

“#”, “” and “$” on the front display

● The loaded cassette has had its record

Remove the cassette and cover the hole

 

panel won’t stop blinking.

safety tab removed.

with adhesive tape, or insert a cassette

 

 

 

with the record safety tab intact.

 

 

● The end of the tape was reached during

The programme may not have been

 

 

timer recording.

recorded in its entirety. Next time make

 

 

 

sure you have enough time on the tape to

 

 

 

record the entire programme.

 

 

 

 

5.

“#” blinks for 10 seconds and the

● # has been pressed when there are no

Check the programmed data and

 

Timer mode is disengaged.

programs in memory, or the timer

re-program as necessary, then press #

 

 

record information has been

again.

 

 

programmed incorrectly.

 

 

 

 

 

6.

The SHOWVIEW system does not

● The recorder’s channel positions have

Refer to “Guide Program Number Set”

 

timer-record properly.

been set incorrectly.

( pg. 49) and re-perform the procedure.

 

 

 

 

7.

“” and “$“ on the front display

● The end of the tape was reached during

The programme may not have been

 

panel won’t stop blinking.

Instant Timer Recording.

recorded in its entirety. Next time make

 

 

 

sure you have enough time on the tape to

 

 

 

record the entire programme.

 

 

 

 

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVSelect your country Auto Set Up10 EN Turn on the recorderPress OK Perform Auto Set UpSelect the language Press OK. The Language Set display appears on the TV screenJust Clock Results of Auto Set Up appear on the front display panel12 EN Language for the on-screen displayReturn to the normal screen Access the Main Menu screenAccess the Country Set screen Language14 EN Basic PlaybackActivate frame-by-frame playback Slow MotionHigh-Speed Turbo Search Pause during playbackSkip Search 16 ENVariable Speed Search Index SearchSoundtrack Selection Next Function MemoryRepeat Playback Manual Tracking18 EN Tape Remaining Time Instant Timer Recording ITRReceiving Stereo and Bilingual Programmes Engage the S-VHS ET mode20 EN Super VHS ET S-VHS ETRecording Playback22 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users24 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionDisengage the timer mode Access the Programme Check screenPress # TIMER, then press Cancel or change a programme Return to the timer modePress # Timer 28 EN Start the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recordersOutput Setting IN/OUT connector30 EN Select the input mode for the L-2 Decoder connector Select and L-2 Input SettingSimple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode34 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeMinimizes picture degradation during editing recording Is powered back onOn or OFF  pg Preference. Normally select AutoWhile the recorder is turned off Entire programme while timer-recording in SP mode38 EN For ExampleAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 40 ENView the Confirmation screen Perform Auto Channel SetManual Channel Set 42 ENDelete a Channel When Receiving a Scrambled Broadcast44 EN Set Stations aSet Stations B Station Name TV Station And ID List46 EN Access the Initial Set screenAccess the Clock Set screen Clock SetStart the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data48 EN Video Channel SetEnter the Guide Program number Showview System SetupGuide Program Number Set Guide Program Number50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN S.T. Picture System Auto Channel Set Auto Set UpExpress Timer Programming Tape Position Indicator Tape Remaining Time

HR-S5950EU specifications

The JVC HR-S5950EU is a highly regarded model from JVC's line of Super VHS VCRs, known for its exceptional performance and advanced features. Designed for both home users and professionals seeking superior video playback and recording, this VCR blends classic technology with innovative enhancements.

One of the standout features of the JVC HR-S5950EU is its Super VHS (S-VHS) capability, which delivers improved resolution and image quality compared to standard VHS formats. This results in sharper, more detailed pictures, making it an excellent choice for those who prioritize video quality. The S-VHS format supports higher bandwidth recording, enabling the capture of finer details, which is particularly beneficial for high-definition video sources.

Another significant characteristic of the HR-S5950EU is its versatility in playback options. The VCR is compatible with both S-VHS and standard VHS tapes, allowing users to enjoy a vast library of video content without compatibility issues. This dual support makes it an ideal solution for users who have existing VHS collections and want to transition to S-VHS without discarding older tapes.

The JVC HR-S5950EU also boasts advanced time-base correction technology, which minimizes tape jitter and enhances picture stability, particularly for older or damaged tapes. This feature is particularly valuable for preserving the quality of cherished recordings that may have degraded over time.

In addition to its playback capabilities, the HR-S5950EU offers a range of recording features. This VCR comes equipped with a variety of timer recording options, allowing users to schedule recordings easily. The one-touch recording feature simplifies the capturing of live broadcasts, making it user-friendly. Furthermore, its search and edit functions provide users with the flexibility to locate and manage recorded content efficiently.

The design of the HR-S5950EU is both functional and compact, fitting seamlessly into home theater systems. It features a user-friendly interface, making it accessible for users of all ages. The remote control enhances convenience, allowing for easy navigation through menus and settings without needing to be directly in front of the unit.

In summary, the JVC HR-S5950EU is a powerful VCR that combines high-quality Super VHS capability with versatility and user-friendly features. Its advanced technologies make it an excellent choice for both casual viewers and video enthusiasts, ensuring that everyone can enjoy their favorite tapes with superior clarity and ease.
Top Page Image Contents