JVC HR-J768EU Video Channel Set, Access Video Channel SET Mode, SET RF Output System

Page 45

EN45

Video Channel Set

Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.

IMPORTANT

Perform the following steps only if —

—Video Channel Set has not been done correctly by the Auto Set Up function (☞ pg. 4).

—you set up the recorder's tuner by Preset Download (☞ pg. 6) instead of using the Auto Set Up function.

—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area.

—you change the connection between your recorder and TV from RF connection to AV connection, or vice versa.

If you have connected the video recorder to your TV via both the RF cable and a 21-pin SCART cable (AV connec- tion), since you do not need the video channel you have to set the video channel to off.

If you have connected the video recorder to your TV via the RF cable only (RF connection), you have to set the correct video channel.

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

1

2

3

ACCESS VIDEO CHANNEL SET MODE

Hold down STOP (5/8) on the recorder until the display panel shows the following.

SET RF OUTPUT SYSTEM

The blinking number on the display indicates the RF output system of your country. If you have selected MAGYARORSZAG (36), CESKA REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE (EE) for the country setting (pg. 4, 8), press %Þ to set to "2". For other countries, set to "1". Then press OK or #.

(1: B/G 2: D/K)

SET VIDEO CHANNEL

With AV Connection

Press TV PROG – until the display panel shows "1OUT– –" (or "2OUT– –").

●Now the video channel is set to off.

With RF Connection

Press TV PROG + or – to set the video recorder to a vacant channel between 22 and 69 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50.

●If the two vertical white bars appear clearly on the screen as shown to the right, go to step 4.

●If the two vertical white bars do not appear clearly, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 22 and 69, consult your JVC dealer.

EXIT VIDEO CHANNEL SET MODE

4 Press OK on the remote control.

With AV Connection:

To view picture signals from the video recorder, set your TV to its AV mode.

With RF Connection:

The channel on which the screen in step 3 appears clearly is your video channel.

To view picture signals from the video recorder, set your TV to the Video Channel.

Page 44 Page 46
Image 45
Page 44 Page 46
Contents HR-J768EU Safety First Safety PrecautionsFor Italy Do not place the recorderBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsEN Initial Settings Auto Set UpIf you are referring to the front display panel If you are referring to the on-screen displayVia an RF cable only RF connection Language CodeYour TV to the Video Channel. Refer to ThisENU Preset DownloadLanguage for the on-screen display If both auto channel set and auto clock set have failedJust Clock Just Clock onLanguage ENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Return to Normal ScreenPower Save Mode Link Functions TV Auto Power OnLI NK NexTView LinkMode Colour System SetAbout Ntsc Playback Counter and tape remaining time readings will be incorrectLoad a Cassette Basic PlaybackPoint Start PlaybackActivate HIGH-SPEED Search Playback FeaturesPause During Playback High-Speed SearchOverride Automatic Tracking Adjust TrackingManually Return to AutomaticSkip Over Unwanted Activate Index SearchSections Index SearchInstant ReView Activate Instant ReviewNext Function Memory Repeat PlaybackSelect Picture Control SET Mode Access Mode SET ScreenEN Playback Picture ControlBasic Recording Engage ITR Mode Recording FeaturesSelect Channel to Watch SET Recording DurationBilingual Programmes Receiving StereoTo Record Stereo And Bilingual Programmes A2 To Record Nicam Stereo And Bilingual ProgrammesS.T. Picture System Select B.E.S.T. ModeEN Recording PreparationRecording PlaybackOr press Record on the recorder EN Timer Recording Timer ProgrammingTimer Warning Satellite Tuner UsersPress SP/LP Before performing Express Timer Programming Express Timer ProgrammingStart Time TimeTimer Mode SET VPS/PDC ModeEngage RECORDER’S VPS/PDC RecordingPress ä Timer Check, Cancel And Replace ProgrammesPress Again to check More information. Each Time you press Next programmesAuto Timer Auto SP→LP TimerProg REC Mode Automatic Satellite Programme RecordingBefore performing the following steps Edit From a Camcorder SET Edit ModeMake Connections SET RECORDER’S InputEdit To Or From Another Video Recorder Input ModeSET Recording DECK’S Start Source PlayerAV2 Select Setting RecorderRecorder Player EN System Connections Connection To Satellite TunerSatellite Tuner Unit Back of TVConnector Scart DecoderSet AV2 Select to AV2. pg Select Input Mode Connecting Using a DecoderConnect Decoder SET TunerSpeaker Television Mains outlet Connecting Using a Stereo SystemTuner Set Access Auto CH SETEN Subsi Diary Sett Ings Auto Channel SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually SU Bsidiary SettingsDelete a Channel When Receiving a Scrambled BroadcastChange Station Channel Position Press %Þ @ #until the item you want to move beginsSwitch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List Perform Tuning Access Manual Channel SET ScreenFine-Tuning Channels Already Stored Select Channel to FINE-TUNEExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET RF Output SystemClock Set Turn the Recorder onSET Date and Time Recorder is preset to receive clock setting Default setting is OFF. Set as desired by pressingSET Just Clock Channel PositionNumber Showview SetupEnter Receiving Channel Position Number Guide Program Number SetTroubleshooting EN Roubleshooting Timer RecordingQuest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?Front View EN IndexRear View VCR, TV Prog +/-,TV +/-, TV Muting Button. Operating JVC TVs belowSpeci Fications Maximum recording timeIN/OUT x 1, IN/DECODER x Ex. Francais is selected for Belgium Auto Set Up referring to the display panel

HR-J768EU specifications

The JVC HR-J768EU is a versatile and reliable VCR that was well-loved for its combination of user-friendly features and high-quality performance. Launched in the early 2000s, this VCR made a significant impact during the transition from analog to digital recording formats, bridging the gap for many users who were familiar with VHS technology.

One of the standout features of the HR-J768EU is its Time Base Corrector (TBC), which greatly enhances picture quality by stabilizing video signals. This technology minimizes errors caused by tape degradation and ensures smoother playback for recorded and pre-recorded tapes alike. The TBC feature is especially useful when playing back older tapes that may have accumulated imperfections over time.

The VCR also incorporates JVC's unique Digital Frame Convert technology, which converts interlaced video to progressive scan. This means that the picture is rendered with improved clarity and detail, providing a more visually appealing experience. The result is a sharper image with reduced flicker, making it an excellent choice for those looking to watch movies and home video recordings with better image fidelity.

In terms of connectivity, the HR-J768EU includes various options, such as SCART and composite video outputs. This allows users to easily connect the VCR to TVs and other devices, ensuring compatibility with a wide range of equipment. The RF output also offers flexibility in terms of connection for older television sets.

The user interface of the JVC HR-J768EU is designed with functionality in mind, featuring an intuitive remote control that simplifies navigation through menus and settings. The on-screen display provides essential information at a glance, making it easier to manage recording and playback functions.

Another notable feature is the ability to schedule recordings with its built-in timer. This functionality enables users to record their favorite shows while they are away, making it simpler to follow a TV schedule without needing to be at home.

In summary, the JVC HR-J768EU combines high-quality image processing technologies with user-friendly features, making it a standout choice for fans of VHS recording and playback. With its robust performance and reliable design, this VCR continues to hold a place in the hearts of users who appreciate the charm of analog video formats. As a result, the JVC HR-J768EU remains an enduring option for those looking to bring their old video collections back to life.
Top Page Image Contents