Tuner Setting, Basic Playback | JVC HR-S2902U specification

Tuner Setting

Turn on the VCR and TV, and select the VCR channel (or AV mode).

Setting channels automatically

— Auto Channel Set

Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting.

Playback

Basic Playback

Turn on the VCR and TV, and select the VCR channel (or AV mode).

ALoad a cassette

AAccess Main Menu screen, then Tuner

Set screen

Press MENU on the Remote. Press rtto move the highlight bar (arrow) to “TUNER SET”, then press OK or e.

BPerform Auto Channel Set

Press rtto move the highlight bar (arrow) to “AUTO CHANNEL SET”, then press OK or e. The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set.

●When Auto Channel Set is complete, “SCAN COMPLETED” appears on screen.

●If the scan was unsuccessful, “SCAN COMPLETED–NO SIGNAL–” appears on screen. Check the connections and start

again.

Press MENU to return to normal screen.

S-VIDEO

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR.

●Do not apply too much pressure when inserting.

●The VCR turns on, and the counter on the on-screen display is reset, automatically.

●If the cassette’s record safety tab has been removed, playback begins automatically.

BStart playback

Press PLAY (4).

●The S-VHS indicator lights up when you play back a tape recorded in S-VHS mode or in S-VHS ET mode ( pg. 9).

Setting channels manually

— Manual Channel Set

You can add the channels you want or delete the channels you do not want manually.

A Access Main Menu screen, then Tuner

Set screen

Press MENU on the Remote. Press rtto move the highlight bar (arrow) to “TUNER SET”, then press OK or e.

B Access Manual Channel Set screen

Press rtto move the highlight bar (arrow) to “MANUAL CHANNEL SET”, then press OK or e.

C Add or skip desired channels

To add channels

A Press the Number keys on the Remote to input a channel number you want to add.

B Press OK or eto set to “ADD”.

CRepeat A to B to add other channels. Press MENU to return to normal screen.

To skip channels

APress rtor the Number keys to select a channel number you want to skip.

BPress OK or eto set to “SKIP”.

CRepeat A and B to skip other channels. Press MENU to return to normal screen.

After a power failure occurs, band selection will be reset to “CATV”.

During playback

Stop playback

Press STOP (8) on the	OR Press STOP/EJECT (0) on
Remote.	the VCR.

Pause playback and view still picture

Press PAUSE (9).

●Press PLAY (4) to resume normal playback.

NOTE:

During still picture, vertical vibration may appear on the TV screen. Press CHr/ton the Remote to get a clearer picture.

Pause and Frame-by-Frame playback

Press PAUSE (9) to pause, then press 2or 6(or PAUSE (9)) repeatedly.

●Press PLAY (4) to resume normal playback.

Picture Search

Press REW (3) or FF (5). Press REW (3) or FF (5) again to perform high-speed search.

●Each time you press REW (3) or FF (5), the search speed changes between low-speed and high-speed.

●Press PLAY (4) to resume normal playback.

Variable-Speed Picture Search (including slow-motion)

Press 2or 6repeatedly.

●Press PLAY (4) to resume normal playback.

●Each time you press 2or 6, the playback speed changes. To decrease the speed during picture search, press the opposite direction button repeatedly.

●During still picture, press and hold 6to start forward (or 2to start reverse) slow motion playback. When you release the button, still picture resumes. During still picture, holding PAUSE (9) for more than 2 seconds also starts forward slow motion playback. If you press PAUSE (9) again, still picture resumes.

NOTE:

During slow motion, some noise may appear on the TV screen. Press CHr/ton the Remote to eliminate the noise.

CONTINUED ON NEXT PAGE

— 7 —