Specifications shown are for SP mode unless specified otherwise. E. & O.E. Design and specifications subject to change without notice.
Provided accessories
: RF cable (F-type), Infrared remote control unit, “AA” battery x 2
TIMER
Clock reference : Quartz
Program capacity : 1-year programmable timer/ 8 programs
Memory backup for timer is not supported.
ACCESSORIES
VHF
UHF
CATV RF output
: Channels 2–13
: Channels 14–69
: 113 Channels
: Channel 3 or 4 (switchable; preset to Channel 3 when shipped) 75 ohms, unbalanced
Tuning system Channel coverage
: Frequency-synthesized tuner
TUNER
: 70 Hz to 10,000 Hz
: 20 Hz to 20,000 Hz
: RCA connectors (IN x 1, OUT x 1)
Signal system
Recording/Playback system
Signal-to-noise ratio Horizontal resolution Frequency range
Normal audio Hi-Fi audio
Input/Output
: NTSC-type color signal and EIA monochrome signal, 525 lines/ 60 fields
: DA-4 (Double Azimuth) head helical scan system
: 45 dB
: 230 lines
VIDEO/AUDIO
: 210 min. with ST-210 video cassette
: 630 min. with ST-210 video cassette
Weight
Format
Maximum recording time
SP
EP
: 18 W
: 2.0 W
: AC 120 Vd, 60 Hz
Power requirement Power consumption Power on
Power off Temperature
Operating : 5°C to 40°C (41°F to 104°F)
Storage: –20°C to 60°C (–4°F to140°F)
Operating position : Horizontal only
Dimensions (W x H x D) : 360 mm x 94 mm x 247 mm (14-3/16" x 3-3/4" x 9-3/4")
: 3.0 kg (6.6 lbs)
: VHS NTSC standard
Specifications
GENERAL
Editing
You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.
AMake connections
Example: When using this VCR as the playback VCR
This VCR (for playback)
To AUDIO/VIDEO OUT
Audio/video cable (not supplied)
To audio/video input
Another VCR (for recording)
●When using this VCR as the recording VCR, connect this VCR’s audio/video input connectors to the audio/video output connectors on the other VCR. If the playback VCR is monaural, connect the audio output connector on the playback VCR to the left audio input connector on this VCR.
BLoad cassettes
Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.
CSelect input mode on recording VCR
Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR);
Select “F-1” — when connecting the other VCR to the audio/video input connectors on the front panel.
Press AUX or CH+/– on the Remote. You can select the input mode also by pressing PAUSE[CH], and then FF[CH+] or REW[CH–]on the VCR. See step B in “Basic Recording”.
DSelect edit mode
Set the edit mode to “ON” for the VCRs if such a mode is equipped.
●On this VCR, set “PICTURE CONTROL” to “EDIT”.
EStart playback
Press PLAY (4) on the playback VCR.
FStart recording
Press REC (7) on the recording VCR.
