JVC HR-V200AG, HR-V207AG Information on Multi-System Compatibility, Off-Air Recording, Playback

Page 12

Information on Multi-System Compatibility

Off-Air Recording

The built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K broadcasts.

TV system

Recorded tape

Multi-system

tuner

(B/G, I, D/K)

NOTE:

This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).

Playback

This recorder can play back all 3 types of recorded tape.

Recorded tape

Playback circuit

Built-in

RF converter

K, I, G, H

Manual switching

Manual switching

Multi-system receiver

Multi-system monitor

NOTE:

When viewing NTSC tapes on a PAL TV set:

The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the part of the video recorder nor the TV.

The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

ATTENTION:

When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the colour system select switch of the TV is adjusted to the AUTO position. In such a case, set the TV’s colour system select switch to the appropriate position which corresponds to the TV system you have selected at the TV System Select screen.

— 12 —

Image 12
Contents Safety Precautions HR-V200AAVideo heads cleaning Usable cassettesTo mobile phone users On placing the recorderButtons, Connectors IndicatorsRear Panel On-screen displayInitial Settings Basic ConnectionsVideo Channel Set RF ConnectionAuto Set Up Clock SettingPlayback Features Adjusting tracking condition Tracking adjustmentPlayback Basic PlaybackRecording Basic RecordingTimer Recording Recording FeaturesExpress Timer Programing Specifying recording length Instant Timer Recording ITRDisengage timer Access Program screenCancel or change program setting Reengage timer recording standby modeFunction settings Other FunctionsChecking tape position Select input mode on recording deck Select edit modeEditing Make connectionsInformation on Multi-System Compatibility Off-Air RecordingPlayback Recorded tapeTape-To-Tape Editing Recorded tape Playback equipmentTuner Setting Manual Channel SetAuto Channel Set Fine-Tuning Channels Delete a ChannelSwap Channel Positions Specifications General