JVC HR-S6700EU specifications Recording

Page 59

 

 

 

EN 59

RECORDING

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Recording cannot be started.

● There is no cassette loaded, or the

Insert a cassette, or using adhesive tape,

 

 

cassette loaded has had its record safety

reseal the slot where the tab was removed.

 

 

tab removed.

 

 

 

 

 

2.

TV broadcasts cannot be recorded.

● “L-1”, “L-2”, “F-1”, “S-1” or “SAT” has

Set to the desired channel.

 

 

been selected as the input mode.

 

 

 

 

 

3.

Tape-to-tape editing is not possible.

● The source (another video recorder,

Confirm that the source is properly

 

 

camcorder) has not been properly

connected.

 

 

connected.

 

 

 

● All necessary power switches have not

Confirm that all units’ power switches are

 

 

been turned on.

turned on.

 

 

● The input mode is not correct.

Set the input mode to “L-1”, “L-2”, “F-1”

 

 

 

or “S-1”.

 

 

 

 

4.

Camcorder recording is not possible.

● The camcorder has not been properly

Confirm that the camcorder is properly

 

 

connected.

connected.

 

 

● The input mode is not correct.

Set the input mode to “L-1”, “L-2”, “F-1”

 

 

 

or “S-1”.

 

 

 

TIMER RECORDING

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Timer recording won’t work.

● The clock and/or the timer have been set

Re-perform the clock and/or timer

 

 

incorrectly.

settings.

 

 

● The timer is not engaged.

Press # and confirm that “#” is

 

 

 

displayed on the front display panel.

 

 

 

 

2.

Timer programming is not possible.

● Timer recording is in progress.

Timer programming can’t be performed

 

 

 

while a timer recording is in progress.

 

 

 

Wait until it finishes.

 

 

 

 

3.

“#” and “[” on the front display

● The timer is engaged but there’s no

Load a cassette with the record safety tab

 

panel won’t stop blinking.

cassette loaded.

intact, or cover the hole using adhesive

 

 

 

tape.

 

 

 

 

4.

The cassette is automatically ejected,

● The loaded cassette has had its record

Remove the cassette and cover the hole

 

and “#” and “[” on the front

safety tab removed.

with adhesive tape, or insert a cassette

 

display panel won’t stop blinking.

 

with the record safety tab intact.

 

 

 

 

5.

“#” blinks for 10 seconds and the

● # has been pressed when there are no

Check the programmed data and re-

 

Timer mode is disengaged.

programs in memory, or the timer

program as necessary, then press # again.

 

 

record information has been

 

 

 

programmed incorrectly.

 

 

 

 

 

6.

The cassette is automatically ejected,

● The end of the tape was reached during

The programme may not have been

 

the power shuts off and “#” and

timer recording.

recorded in its entirety. Next time make

 

“[” won’t stop blinking.

 

sure you have enough time on the tape to

 

 

 

record the entire programme.

 

 

 

 

7.

The SHOWVIEW system does not timer-

● The recorder’s channel positions have

Refer to “Guide Program Number Set”

 

record properly.

been set incorrectly.

( pg. 55) and re-perform the procedure.

 

 

 

 

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsSelect your country Auto Set Up10 EN Turn on the recorderPress rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download12 EN Set the video channelJust Clock Language for the on-screen display14 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller16 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link 18 EN Basic PlaybackActivate Frame-by-frame playback Slow MotionVariable Speed Search Pause during playbackInstant ReView 20 ENSkip Search High-Speed Turbo SearchManual Tracking Index SearchNext Function Memory Activate Repeat Playback 22 ENRepeat Playback Soundtrack SelectionStart recording Recording Resume FunctionChoose a programme Set the tape speedRecord One Programme While Watching Another Instant Timer Recording ITREngage the ITR mode 24 ENSet the counter display Reset the counterEngage the S-VHS ET mode Tape Remaining TimeType of Broadcast On-screen Display Being Received Receiving Stereo and Bilingual ProgrammesRecording Playback28 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users30 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel position32 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify34 EN Select the L-2 Select modeRecording mode Programme RecordingCamcorder Edit From aOUTPUT/INPUT SET, then 36 ENPress rt to move Highlight bar pointer toDecoder connector Select and L-2 Input Setting38 EN Another Video RecorderPlayer Simple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode42 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeOff, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer isFor Example 46 ENAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 48 ENPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 50 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 52 ENSet Stations a Station Name TV Station And ID List54 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetEnter the Guide Program number Showview SetupGuide Program Number Set Guide Program Number56 EN Access the Clock Set screenClock Set Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data58 EN TroubleshootingRecording 60 EN Other ProblemsPlayback 62 EN Preset Download Auto Set UpConnecting To a Satellite Receiver Delete a Channel Language Manual Channel Set Manual Tracking Mode Set pg International Telephone Language CodeCountry Code

HR-S6700EU specifications

The JVC HR-S6700EU is a standout model in the realm of VHS players and recorders, celebrated for its impressive array of features and performance capabilities. Released during the height of VHS technology in the early 1990s, this device combines innovative engineering with user-friendly operation, making it a cherished model among enthusiasts and casual users alike.

One of the hallmark features of the HR-S6700EU is its S-VHS recording capability, which enhances the quality of the video output, providing sharper and clearer images compared to standard VHS. This dual-format recording means that users can still play regular VHS tapes while enjoying the superior quality of S-VHS recordings. This flexibility makes the HR-S6700EU an excellent choice for anyone looking to transfer old tapes to a higher-quality format or simply enjoy their favorite films in better clarity.

The device boasts advanced picture processing technologies, including JVC’s unique digital image stabilization, which minimizes tracking and playback issues that can occur with older tapes. This feature ensures that users maintain a clear viewing experience without the annoying artifacts that can detract from older recordings. Additionally, the HR-S6700EU incorporates automatic tracking technology that adjusts the playback head alignment, ensuring optimal performance even with worn or damaged tapes.

Another notable characteristic of the HR-S6700EU is its VCR+ system, which simplifies the programming of recordings. This automated feature allows users to input a code corresponding to the desired program and have the VCR schedule the recording without any tedious manual settings. The ease of use extends to its intuitive front panel layout, making navigation and operation straightforward for users of all ages.

In terms of connectivity, the JVC HR-S6700EU is equipped with various inputs and outputs, including composite video, audio outputs for connecting to home theater systems, and even a digital output, which allows for easier transfers to modern devices. The built-in tuner provides access to terrestrial broadcasts, enhancing the overall functionality of the VCR.

With its robust build quality and reliability, the JVC HR-S6700EU stands the test of time. Users appreciate its compact design and the fact that it integrates seamlessly into existing entertainment systems. All in all, the JVC HR-S6700EU encapsulates the pinnacle of VHS technology, marrying performance with versatility, making it a valuable addition to any retro video collection.
Top Page Image Contents