JVC HR-J391EM, LPT0685-001A manual Timer Recording, Express Timer Programing

Timer Recording

Up to 8 timer recording programs can be made using Express timer programing method as far as a year in advance. Remember, the clock must be set before you can program the timer.

NOTES:

●If all the 8 programs have already been set, “PROGRAM FULL” appears on the TV screen.

●After timer recording is completed, the recorder turns off automatically.

●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

●In case of a power failure after programming, the recorder’s memory backup keeps your selections (if the lithium battery is not exhausted).

Express Timer Programing

●Remember, the clock must be set before you can program the timer.

●Load a cassette with the record safety tab intact. The recorder turns on, and the counter is reset, automatically.

●Select the appropriate colour system with “PAL/MESECAM” and “NTSC” in Function settings.

APress PROG on the remote control to access the Program screen.

B Press START+/–,STOP+/–,DATE+/–		– P1 –
or PR+/– repeatedly to enter the start	START	STOP
	21:00	–:– –
time, stop time, date or channel.
		SP
● Press and hold START+/– or
	DATE	TV PROG
STOP+/– to increase the time in
	– –.– –	– –
30-minute intervals.	[+/–]
● To set the tape speed, press SP/LP/	[PROG] : EXIT

EP (p).

● To timer-record daily (Monday–Friday) or weekly serials, press DAILY (number key 8) or WEEKLY (number key 9). Pressing the button again makes the “DAILY” or “WEEKLY” display disappear.

CPress OK or PROG.

●If “PROGRAM OVERLAPPED” appears, see “Program overlap warning display”.

DPress #. The recorder turns off automatically and “#” is displayed on the display panel.

NOTE:

●If the tape reaches its end during timer recordings, the recording stops and “#”, “ ” and “ $” on the front display panel blink.Press STOP/EJECT (0) on the recorder to eject the cassette or press REW (3) on the remote control to rewind the tape.

To use the recorder while it is in timer recording standby mode

Press #, then press 1. After you use the recorder, press # again to put the recorder into timer recording standby mode.

Checking, canceling or changing program settings

ADisengage timer

Press #, then press 1.

●When “AUTO TIMER” is set to “ON”, you do not have to press

#.

B Access Program Check screen					PR START		STOP	CH	DATE
Press ".				1		8:00	10:00	3	24.04
				2		10:00	10:45	2	25.04
● When the weekly serials are programed,				3		11:30	13:00	1	25.04
				4
a day of the week appears, when the				5
				6
daily serials are programed, “DAILY”				7
				8
appears.
				[		] : NEXT
C Access Program screen						START	– P1 –	STOP
Press	"	again. Each time you press	,
			"			8:00		10:00
the next program’s Program screen								SP
appears.						DATE		TV PROG
						24:04		3
				[	] : NEXT

DCancel or change program setting

To cancel a program, press & when the Program screen you do not want is shown.

To change a program, press the appropriate button: START+/–, STOP+/–, DATE+/–, PR+/–, DAILY, WEEKLY and/or SP/LP/EP (p) when the Program screen on which you want to make changes is shown.

EReturn to normal screen

Press " repeatedly until no Program screen is shown.

FReengage timer recording standby mode

Press #. The recorder turns off automatically and “#” is displayed on the display panel.

●When “AUTO TIMER” is set to “ON”, the timer recording standby mode automatically resumes when you turn off the recorder.