JVC HR-VP673U, HR-VP473U manual SET Channel Number, Engage Timer Mode

Page 35

UMBER

2

3

1

"8"

5

6

4

7

8

9

 

0

 

PROG. 1

2

NUMBER "9"

TIMER

4

CH+/–

EN35

7

SET CHANNEL NUMBER

Press CH +/–.

 

Holding down CH +/– rapidly scans through the

channels.

 

If you are using a cable box, enter the cable box

 

channel, not the channel to be recorded. The channel

 

to be recorded must be selected on the cable box.

 

(The cable box channel is the VCR’s channel that

 

displays the channels received by the cable box.)

 

To timer-record cable or DBS channels through an

 

external tuner connected to the VCR’s external input

 

connectors, press the NUMBER key "0" so that "F-1"

 

appears instead of a channel number.

 

SET TAPE SPEED

8 Press SP/EP to set the tape speed.

 

RETURN TO NORMAL

 

SP/EP

3

OK

ATTENTION

If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.

Pattern 1: The program with the lower program number will be recorded.

10:00

11:00

12:00

Program 1

 

CH10

 

 

 

 

Program 2

 

 

 

 

 

 

Not recorded

 

 

CH40

 

 

 

Pattern 2: The program that is broadcast earlier will be recorded.

10:00

11:00

12:00

Program 1

 

CH10

 

 

 

 

Program 2

 

 

 

Not recorded

CH40

 

 

Pattern 3: The program that is broadcast earlier will be recorded, followed by the remaining portion of the other program.

10:00

11:00

12:00

Program 1

 

CH10

 

 

 

 

Program 2

 

 

 

 

 

CH40

Not recorded

 

SCREEN

 

Press PROG. or OK. "PROGRAM COMPLETED"

 

appears on the screen for about 5 seconds, then normal

9 screen appears.

10

ENGAGE TIMER MODE

Press TIMER. The VCR turns off automatically and "ä"

is displayed on the display panel.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 3 through 9, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

NOTES:

To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

In case of a power failure after programming, the VCR’s memory backup keeps your selections for approximately 10 minutes. Programs that start after midnight must have the next day’s date. After timer recording is completed, the VCR’s power goes off automatically.

You can program the timer while a regular recording is in progress; the on-screen menu will not be recorded.

If the end of tape is reached during timer recording, the cassette is automatically ejected.

When timer-recording cable or satellite channels through an external tuner, be sure to keep the cable box or satellite receiver's power ON.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents HR-VP673U HR-VP473U Do not place the VCR Dear CustomerGrounding or Polarization Power SourcesPower Cord Protection Power LinesReplacement Parts AccessoriesDamage Requiring Service CleaningContents VP473U EN Installing Your NEW VCRBasic Connections VP673UConnect VCR to TV Check ContentsConnect VCR to Power Source Situate VCRAuto Clock Set/Auto Tuner Set Plug & Play SetupPlug & Play EN I Nitial Sett IngsInformation Language Shuttle PLUS%Þ, then Press OK or Shuttle Access Clock SETClock PreparationSemi-Auto Select D.S.T. ModeSET Auto Clock to on Select Host ChannelSET Date Select Time ZoneReturn to Normal Screen SET TimeSET Access Main Menu ScreenAccess Tuner SET Screen TunerAdd Or Delete a Channel Access Manual Channel SET ScreenADD or Skip Desired ChannelSimple Playback Simple Recording Search Playback FeaturesActivate FRAME-BY Frame PlaybackActivate HIGH-SPEED Access Distant CodeEngage Manual Tracking Mode Adjust Manual TrackingPicture Control Access Function SET ScreenSelect Picture Control SET Mode Layback and Recording FeaturesVideo Stabilizer Stop Repeat Start RepeatSuperimpose Select The Soundtrack HR-VP673U Only Access Function SETSET Mode Select Audio MonitorMovie Advance HR-VP673U Only Access Skip MenuPerform Movie AdvanceActive Video Calibration Recording PlaybackRecord One Program While Watching Another Recording FeaturesEngage TV Mode Select Channel for ViewingTo Record SAP Programs HR-VP673U Only Stereo And SAP Second Audio Program HR-VP673U OnlyInput Receiving Channel Number VCR Plus+ Timer ProgrammingEN Timer Recording Tion is displayed on Timer-Recording informaPlusCode number you Entered and the matchingInitial SET, then press VCR Plus+ SetupVCR Plus+ Guide Channel Matching Press CH5, Shuttle Access Guide Channel SET ScreenInput Guide Channel NumberSET Program Date Express Timer ProgrammingSET Channel Number Engage Timer ModeProgram Cancel or Revise aRE-ENGAGE Timer Check, Cancel And Revise ProgramsAuto Timer Auto SP→EP TimerDuration Instant Timer Recording ITREngage ITR Mode SET RecordingEdit To Another VCR VP473U Recorder Edit From a Camcorder Or Another VCRLoad a Cassettes VP673U RecorderSet to AUX. Press the Number key 0 and/or CH to select F-1 SET RECORDER’S Input ModeSetNOTEthe camcorder to its play mode Set your VCR to its record modeSET TV Brand Code EN Special FeaturesTV Multi-Brand Remote Control Turn on the TVOperate Cable BOX Cable Box Multi-Brand Remote ControlTurn on the Cable BOX Enter Cable BOX BrandEnter DBS Receiver Brand EN SP Ecial FeaturesDBS Receiver Multi-Brand Remote Control Turn on the DBS ReceiverTurn VCR Power on Unplug Vcrs PowerSET Remote Control Plug in Power CordMake sure the cassettes window is Recorder’s input mode has been Set incorrectly Input modeCassette gets stuck partway Procedure Those in the previous area Timer againRe-perform the VCR Plus+ setup Doesn’t work properly What happens if the tape runs out during recording? EN Questions and AnswersCan the VCR indefinitely remain in the still mode? Can the VCR indefinitely remain in the Record-Pause mode?List Of Terms Express Timer ProgrammingMBR Multi-Brand Remote Code Setting IndexFront View VP473U EN IndexRear View VP673U Remote Control HR-VP673U SpecificationsFor S Ervicing Only in U.S.A HOW to Locate Your JVC Service CenterLimited Warranty Warranty Only in U.S.A. E NHR-VP673U/473U

HR-VP473U, HR-VP673U specifications

The JVC HR-VP673U and HR-VP473U are two remarkable VCR models that exemplify the quality and technological advancements that JVC has been known for across its product lineup. These models have been designed to cater to the needs of every video enthusiast, offering an array of features that enhance user experience and playback quality.

One of the standout features of the HR-VP673U is its versatile playback capabilities. It supports Super VHS, which provides an improved picture quality over standard VHS. This model is particularly notable for its S-VHS playback that allows users to enjoy high-resolution videos with greater sharpness and clarity. The HR-VP473U, while slightly more basic, also offers solid VHS functionality, making it an ideal choice for those who need reliable performance without the additional features of the upper model.

Both units are equipped with various functionalities including a video cassette library capable of handling multiple tape formats, which allows users to play and record with ease. The built-in timer programming makes it convenient to schedule recordings, ensuring that users never miss their favorite shows. This functionality is a significant time-saver, enabling hassle-free viewing based on personal schedules.

Additionally, both the HR-VP673U and HR-VP473U leverage JVC's innovative Auto Tracking technology. This feature automatically adjusts the video heads for optimal playback, ensuring that image distortions, such as tracking errors, are minimized. The result is a seamless viewing experience without the hassle of manual adjustments.

Picture quality is further emphasized through their integration of various processing technologies. JVC has implemented features such as high-speed rewind, which allows users to quickly navigate through tapes, and crystal-clear playback options that enhance the overall viewing experience. These features ensure that users enjoy their media without compromise.

Both models include standard connectivity options, such as RCA video outputs and audio outputs, allowing for easy integration with older televisions and home theater systems. The HR-VP673U even offers additional S-video outputs, providing increased video quality for enhanced viewing.

In summary, the JVC HR-VP673U and HR-VP473U are excellent choices for anyone looking to invest in a reliable and feature-rich VCR. With superior playback capabilities, innovative technologies, and user-friendly features, these models truly reflect JVC's commitment to providing top-notch video recording and playback experiences. Whether users prefer high-quality S-VHS or standard VHS functionality, both products deliver excellent value tailored to both casual viewers and serious collectors alike.
Top Page Image Contents