JVC Model HR-VP639U manual On-Screen Timer Programming, Access Program SET Screen

Page 40

40TIMERRECORDING(cont.)

On-Screen

Timer

Programming

MENU

6

q

 

CH

 

 

 

1

2

3

NUMBER

4

5

6

 

 

 

 

7

8

9

 

 

0

 

CH

OK

MENU

SHUTTLE PLUS

ILLUMI GUIDE

When Using The Illumi-Guide Feature

● Buttons light or blink on the remote control for approximately 10 seconds. If the button or buttons extinguish during timer programming, press ILLUMI GUIDE and the button or buttons previously lit or blinking come back on. If the button or buttons do not re-light or start blinking again, press MENU as many times as necessary to return to the normal screen and extinguish all illuminated buttons, and re-perform the timer programming procedure from the beginning.

● If for some reason the remote control's signal is not received by the VCR, press MENU as many times as necessary to return to the normal screen and extinguish all illuminated buttons, and re-perform the timer programming procedure from the beginning.

You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer (☞ pg. 7 or 9).

Or you can use the Illumi-Guide feature, where the remote control tells you which button to press next by lighting it up. To use the Illumi-Guide feature, with the TV/CABLE/VCR switch set to "VCR", press ILLUMI GUIDE before performing step 2. (MENU, REW, PLAY, FF light up at this time.)

If you aren't going to use the Illumi-Guide feature, go directly to step 1.

LOAD A CASSETTE

1 Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load.

●The VCR comes on, and the counter is reset, automatically.

●If watching channel 3 or 4, press TV/VIDEO to select the VIDEO mode. VIDEO is displayed on the front display panel.

 

ACCESS ON-SCREEN

2

MENU

Press MENU as many times as necessary to bring up the

Main Menu screen.

● If you are using the Illumi-Guide feature, MENU

 

 

lights up and OK blinks.

ACCESS PROGRAM SET SCREEN

 

Make sure the arrow is to

PROGRAM 1

 

the left of "PROGRAM

 

 

 

3 SET", then press OK.

DATE

- - / - -

START

- - : - - AM

 

● If you are using the

STOP

- - : - - AM

 

CHANNEL

- - SP

 

Illumi-Guide feature, OK

PRESS NUMBER KEY(0-9)

 

blinks when the

 

OR (5,°), THEN (OK)

 

following buttons are lit:

PRESS (MENU) TO END

 

NUMBER keys (0 – 9),

 

 

 

SHUTTLE PLUS, CANCEL and MENU.

 

 

 

 

 

SELECT PROGRAM

 

 

NUMBER

 

 

 

Press the appropriate NUMBER keys or CH5°or

 

SHUTTLE PLUS 5°to select a vacant program number,

4 then press OK. The first time you do this, all numbers will

 

be vacant, so just press OK when the screen appears.

●If you are using the Illumi-Guide feature, OK blinks when the following buttons are lit: NUMBER keys (0

– 9), SHUTTLE PLUS, CANCEL and MENU.

Page 39 Page 41
Image 40
Page 39 Page 41
Contents HR-VP639U Dear Customer Do not place the VCRImportant Product Safety Instructions Product and cart combination Should be moved with care. QuickContents Basic Connections Initial Settings Dual Quick SetPerform Dual Quick SET During Auto Clock SetLanguage Clock SET Screen ClockPreparation Select Host Channel Select Time ZoneSemi-Auto Or Shuttle PlusSelect D.S.T. Mode Select ModeMake Corrections AutoAccess Main Menu Access Tuner SETAccess Band Screen TunerPerform Auto Channel SET Return to Normal ScreenAccess AFC Screen Access Manual Channel SET ScreenMake Selection Return to NormalTuner Cable Box Controller Situate ControllerAttach Controller Connect Cable BOX to VCROutput Screen Access Cable BOXSet Cable Box Output Channel Select Cable BOX Output Channel Return to VCR PLUS+ SET-UP ScreenTurn on Cable BOX Brand SET ScreenYou can now set up the VCR Plus+ feature pg VCR Plus+ Setup Access Main Menu ScreenProcedure Press CH5 or ShuttlePlus 5 to place Arrow next to CustomInput Receiving Channel Number Simple Playback Load a CassetteFind Program Start Point Start PlaybackSimple Recording Pause During Playback Activate FRAME-BY Frame PlaybackPlayb a CK and Recording Feat Ures Still Picture/Frame-By- Frame PlaybackActivate VARIABLE-SPEED Search Activate HIGH-SPEED SearchVariable-Speed Search Reverse Play High-Speed SearchEngage Manual Tracking Mode Adjust Manual TrackingLayback and Recording Features RE-ENGAGE Automatic TrackingAccess Audio Monitor Access Function SETSelect The Soundtrack Access Superimpose SuperimposeAccess Distant Code Skip Over Unwanted SectionsStart Repeat Stop RepeatActivate Instant Review Activate CounterMemory Return to Counter Position ZeroTape Position Indicator Make ConnectionNext-Function Memory AV Compu Link PlaybackExample Press CH5 or Shuttle Plus 5 to place the arrowNext to Function SET, then press OK Arrow next to SpecialAccess Video Calibration Screen Active Video CalibrationRecording VCR takes about Seconds to assessQuality of the tape Use, then recording Begins with the picture level optimizedPlayback Tape in useEngage TV Mode Reset Counter to ZeroSelect Channel for Viewing Display Elapsed Time on ScreenAccess 2ND Audio Stereo And SAP Second Audio ProgramTo Record SAP Programs To Record Stereo ProgramsVCR Plus+ Timer Programming Access VCR PLUS+ ScreenTimer Recording Enter Pluscode NumberEngage Timer Mode Check Input DataCHECK/CORRECT Input DataOn-Screen Timer Programming Access Program SET ScreenSET Program Information Shuttle Plus 5 buttonDisengage Timer Cancel a ProgramRE-ENGAGE Timer Check And Cancel ProgramsAccess Auto Timer Auto TimerInstant Timer Recording ITR Engage ITR ModeSET Recording Duration Press RECEdit To Or From Another Edit From a Camcorder Access AUX Input Screen Shuttle Plus 5. IfAssemble Editing Audio Dubbing SET Remote Control Mode Turn on the TVSET TV Brand Code Operate TVCable Box Multi-Brand Remote Control Turn on the Cable BOXEnter Cable BOX Brand Operate Cable BOXUnplug Vcrs Power SET A/B Code SwitchPlug in Power Cord Turn VCR Power onCassette gets stuck partway TroubleshootingMake sure the window side is up, Timer again OubleshootingWhen scanning channels, some Re-perform the VCR Plus+ setup Doesn’t work properlyResume recording Remote control won’t operate Questions and Answers PlaybackMBR Multi-Brand Remote Code Setting VCR Plus+ Timer ProgrammingIndex List Of TermsFront View Remote Control Provided Front Display PanelEIA monochrome signal Year programmable timer20C to 60C -4F to140F Maximum recording time881-5923 305 415 For ServicingLittle Falls Road Fairfield, NJ Warranty Slater DriveMemo HR-VP639U
Top Page Image Contents