JVC HR-A22U manual Counter Reset, Tape Position Indicator, Next-Function Memory

18

PLAYBACKANDRECORDINGFEATURES(cont.)

POWER REW FF

2 3

q 5/8 6

PLAY

TIMER

POWER

1 2 3

DISPLAY

4 5 6

Counter Reset

1	RESET COUNTER TO ZERO
	Press C.RESET.
	NOTE:
	By pressing the DISPLAY button, you can change the
	display to show the counter reading, channel number
	or clock time. (Channel number is not displayed during
	playback.)

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW or
perform an Index Search. The			+	+	+
position of "	" in relation to "B"	B					E
(Beginning) or "E" (End) shows you
where you are on the tape.			COUNT			0:33:27
** SUPERIMPOSE must be set to

ON, or the indicator will not appear (☞ pg. 16).

7	8	9
		0				Next-Function Memory
	T	Y
2	4			3	FF	The Next Function Memory “tells” the VCR what to do after
						rewinding.
REW
q	5		6			* Before continuing, ensure that the VCR is in stop mode.

	a– For Automatic Start Of Playback After Tape Rewind . . .
	. . . press REW, then press PLAY within 2 seconds.
	b– For Automatic Power Off After Tape Rewind . . .
	. . . press REW, then press POWER within 2 seconds.
C.RESET	c– For Automatic Timer Standby After Tape Rewind . . .
	. . . press REW, then press TIMER within 2 seconds.