Magnavox VR201BMG Automatic Channel Setup cont’d, Adding/Deleting Channels, Press the Menu button

Automatic Channel Setup (cont’d) 13

Adding/Deleting Channels

1

Press the MENU button.

2

2-3

Press the PLAY/o button or the STOP/p button to select TUNER SET UP, then press the F.FWD/B button.

3

Press the PLAY/o button or the STOP/p button to select ADD/DELETE CH, then press the F.FWD/B button.

SELECT op ADD/DELETE B

124DELETED

125DELETED

1→ DELETED

2ADDED

3ADDED

TO END PUSH EXIT

NOTE: If you have an antenna, channel numbers 2-69 will appear on the ADD/DELETE CH menu. If you have a cable connection, channels 1-125 will be available.

6

1

POWERVCR/TV

1 2 3

4 5 6

7 8 9

0

SPEED

MENU STATUS/EXIT CLEAR

REWIND /PLAY

REC/OTR /STOP

EJECT

CHANNEL
MEMORY	5
F.FWD
PAUSE/STILL
	4

4

Press the PLAY/o button or the STOP/p button until the channel number you want to add or delete appears beside the arrow.

SELECT op ADD/DELETE B

16DELETED

17ADDED

18→ ADDED

19ADDED

20ADDED

TO END PUSH EXIT

5

Press the F.FWD/B button to select ADDED or DELET- ED. Repeat steps 4 and 5 until you have added or deleted all the channels you wanted to add or delete.

6

Press the STATUS/EXIT button.

Helpful Hint

•If you want the TV screen to be solid blue when a weak signal is received, set BLUE BACKGROUND to ON. The screen will be blue and the sound will be muted. Or, if you want to receive the weak signal, set BLUE BACK- GROUND to OFF. When you select a channel that is receiving a weak sig- nal, you will see and hear the static in the TV programming. The channel

number will not appear on the screen when you select a weak channel. To set BLUE BACKGROUND to ON or OFF, follow these steps.

1.Press the MENU button.

2.Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button.

3.Press the PLAY/o button or the STOP/p button to select BLUE BACK- GROUND. Then, press the F.FWD/B button repeatedly so that OFF (or ON) appears beside BLUE BACKGROUND.

4.Press the STATUS/EXIT button.