Emerson EWV404 owner manual Recording Features, Hint for Timer Recording, Copying a Video Tape

9. Recording Features

Timer Recording

•Insert a tape with its record tab into the VCR.

Hint for Timer Recording

• If there is a power failure or the VCR has been unplugged for more than 30 sec-

onds, the clock setting and all timer settings will be lost.

1		-MENU-
		B TIMER PROGRAMMING
	MENU	AUTO REPEAT	[OFF]
		CHANNEL SET UP
		CLOCK SET
		LANGUAGE SELECT
		F.FWD

5 Select the desired start
time (hour)
STOP	PLAY	ONE TIME PROGRAM
or		PROGRAM NUMBER			4
		DATE		0 5 / 0 3	MON
	F.FWD	START TIME		0 7 : 3 0	– –
		END	TIME	– – : – –	– –
		CHANNEL		– –
Select the		REC SPEED		– –
minute

9		ONE TIME PROGRAM
STOP	PLAY	PROGRAM NUMBER				4
		DATE		0 5 / 0 3		MON
	or	START TIME		0 7 : 3 0		PM
		END	TIME	0 8 : 3 0		PM
		CHANNEL		1 6
		REC SPEED		SP	B SP
						SLP
	Select the desired recording speed
			C.RESET
			EXIT

• If the tape runs out before the end time, the VCR will switch to the Stop mode

immediately, eject the tape and the VCR power will be turned off. The TIMER

indicator will flash.

• If a tape is not in the VCR or does not have the record tab, the TIMER indicator

flashes and timer recording cannot be performed. Please insert a recordable tape.

• When all the Timer Recording are completed, the TIMER indicator flashes.

To play or eject the recorded tape, press the POWER button first, and then

press the PLAY or EJECT button.

To cancel a Timer Recording that is in progress

2

STOP PLAY

or

PROGRAM NUMBER 4

DATE	– – / – –
START TIME	– – : – –	– –
END TIME	– – : – –	– –
CHANNEL	– –
REC SPEED	– –

Select an empty program number

STOP	PLAY
	or
	F.FWD

6 ONE TIME PROGRAM

10Turn off the VCR POWER

for recording

• TIMER indicator on the VCR lights up.

Hint

•To go back one step, press the REW button (during the steps [3] to [9].)

Press the STOP/EJECT button on the VCR.

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes

may be an infringement of copyright laws.(Back of TV)

(Back of Playing VCR) (Back of Recording VCR*)

2

		F.FWD
3		PROGRAM NUMBER 4
STOP	PLAY	B ONCE
		DAILY
	or	WEEKLY
		Select “ONCE”, “DAILY”
		(Mon-Fri), or “WEEKLY”
		F.FWD

STOP	PLAY	PROGRAM NUMBER		4
		DATE	0 5 / 0 3	MON
		START TIME	0 7 : 3 0	PM
or		END TIME	– – : – –	– –
		CHANNEL	– –
		REC SPEED	– –	AM
			B PM
		Select “AM” or “PM”
		F.FWD

7Repeat the procedure in steps 5 and 6 to set the end time.

F.FWD

To Check, Correct, or Cancel a Timer Program

1) Turn the power on by pressing
	the POWER button.
2)	Select main menu by pressing
	the MENU button.
3)	Select "TIMER PROGRAM-
	MING" by pressing the PLAY or
	STOP button. Then, press the
	F.FWD button.
4)	Select the program number
	which you want to check by
	pressing the PLAY or STOP but-
	ton. The details of the program

		1	AUDIO	ANT
	OUT			IN
OUT			OUT IN	Connect
IN	IN	Connect		OUT
			VIDEO
VIDEO	AUDIO

	RF Cable
Audio/Video Cables	(supplied)
	*Front input jacks are also available
(not supplied)

1)	Insert a pre-recorded tape into the playing VCR.
2)	Insert a tape with its record tab into the recording VCR.
3)	Press the SPEED button on the remote control of the recording VCR
	to select the desired recording speed (SP/SLP).
4)	Select the “L1” or “L2”position on the recording VCR.
	• To use the input jacks on the back of the VCR, select "L1" position by
	pressing [0], [0], [1] on the remote control or the CHANNEL buttons.

4Select the desired month

STOP	PLAY	ONE TIME PROGRAM
	or	PROGRAM NUMBER			4
		DATE	0	5 / 0 3	MON
		START TIME	– – : – –		– –
	F.FWD	END TIME	– – : – –		– –
		CHANNEL	– –
		REC SPEED	– –

8

STOP PLAY

or

ONE TIME PROGRAM
PROGRAM NUMBER		4
DATE	0 5 / 0 3	MON
START TIME	0 7 : 3 0	PM
END TIME	0 8 : 3 0	PM
CHANNEL	1 6
REC SPEED	– –

Select the desired channel

you selected will appear on the

TV screen.

•Go to the digit you want to change by pressing the F.FWD or REW button. Then, enter cor- rect numbers by pressing the PLAY or STOP button.

•You may cancel the entire pro-

	• To use the input jacks on the front of the VCR, select "L2" position by
	pressing [0], [0], [2] on the remote control or the CHANNEL buttons.
5)	Press the REC/OTR button on the recording VCR.
6)	Begin playback of the tape in the playing VCR.
7)	To stop recording, press the STOP/EJECT button on the recording
	VCR, then stop playback of the tape in the playing VCR.

Hint

Select the desired day

STOP PLAY

or	• You can program one
	year in advance.
	F.FWD

•If you have connected the VCR to a cable box or satellite box as the Connection A on page 1, select the VCR to channel 3 or 4 (the RF output channel of the VCR). Then, select the desired channel at the cable box or satellite box. Leave the cable box or satellite box on for timer recording.

F.FWD

gram by pressing the REW but- ton while the program number flashes.

5)Press the C.RESET/EXIT button to exit.

6)Press the POWER button to return to timer stand-by mode.

- 6 -

Hint

•For best results during dubbing, use the VCR’s front panel controls whenever possible. The remote control might affect the playing VCR’s operation.

•Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are not recommended.

•You can use a video disc player, satellite receiver, or other audio/video component with A/V out- puts in place of the playing VCR.

•“L1” or “L2” is found before the lowest memorized channel. (Example: CH02)

EN