1.Unzip the lower storage compartment of the Video Bag and remove the cigarette lighterINSTALLAT adapter and four straps. Zip up the Video Bag storage compartment.
2.RemovetheLCDMonitorandtheVideoCassettePlayerfromtheVideoBag. Slidethepower connector through the slot in the bag and attach it to the power plug on the rear of the Video
Cassette Player.ION
3.Slide the LCD Monitor and the Video Cassette Player into the Video Bag and attach the
Velcro straps to each side of the Video Cassette Player by sliding the strap through the
bracket on each side of the Video Cassette Player.INSTRUCTIONS
A.Installing the "Video in a Bag" System Between the Driver/Passenger SeatsPrior to Vehicle Installation
Figure 1
1.RefertoFigure1. Takeoneofthestrapsandconnectthelatchtotheuppermetalringontheleft side of the Video Bag. Attach the "S" hook to the same ring after looping the strap around the headrest of the driver's seat. Repeat this process for the right side (Passenger Seat).
2.Take another strap and connect the latch to lower metal ring on the left side of the Video Bag. Attachthe"S"hooktothesameringafterloopingthestraparoundthefrontseatrail. Repeatthis process for the right side. In some vehicles, it may be necessary to attach the "S" connector to the rail directly, as it may not be long enough to reach back to the ring. Also, depending on the desired angle, you may need to attach the latch to either the front or the rear ring on the bottom of the bag, depending on your vehicle.
3.Adjust the straps so that the Video Bag is tightly secured.
2
2
128-6168A
3 of 8